ENERGIS Test Report

Passed: 11

Failed: 0

Unknown: 0

Total: 11

Environment

Test Session ID

415a0826

Hostname

DPC

Windows 11 (10.0.26100)

Python

3.13.7 (tags/v3.13.7:bcee1c3, Aug 14 2025, 14:15:11) [MSC v.1944 64 bit (AMD64)]

Generated_at

2025-10-05 22:53:09

Log_file

G:\_GitHub\HW_10-In-Rack_PDU\tests\tc_eeprom_persistence\report_tc_eeprom_persistence\tc_eeprom_persistence_results.log

Steps

PRE-STEP 1 Reboot device via UART

PASS

Started	Finished
2025-10-05 22:51:30	2025-10-05 22:51:39

Step Log

DETAIL

Log

[2025-10-05 22:51:30] [PRE-STEP 1] Reboot device via UART
[2025-10-05 22:51:30] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:30] [INFO] [SERIAL]   port=COM11, command='REBOOT', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:30] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:30] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:30] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:30] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:30] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:31] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:31] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:31] [INFO] [SERIAL TX] Sending command: 'REBOOT'
[2025-10-05 22:51:31] [INFO] [SERIAL TX] Payload length: 8 bytes (including CR+LF)
[2025-10-05 22:51:31] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:31] [INFO]   0000  52 45 42 4F 4F 54 0D 0A                           |REBOOT..|
[2025-10-05 22:51:31] [INFO] [SERIAL TX] Wrote 8 bytes to port
[2025-10-05 22:51:31] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:31] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:31] [INFO] [SERIAL RX] Chunk #1: received 32 bytes (elapsed: 0.359s, total: 32 bytes)
[2025-10-05 22:51:31] [ERROR] [SERIAL ERROR] Exception during send_command:
[2025-10-05 22:51:31] [ERROR] [SERIAL ERROR]   Type: SerialException
[2025-10-05 22:51:31] [ERROR] [SERIAL ERROR]   Message: ClearCommError failed (PermissionError(13, 'The device does not recognize the command.', None, 22))
[2025-10-05 22:51:31] [ERROR] [SERIAL ERROR]   Port: COM11, Command: 'REBOOT'
[2025-10-05 22:51:31] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:31] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:31] [INFO] [SERIAL] wait_for_reboot_and_ready() called
[2025-10-05 22:51:31] [INFO] [SERIAL]   port=COM11, ready_token='SYSTEM READY', baudrate=115200, timeout=15.0s
[2025-10-05 22:51:31] [INFO] [SERIAL] Waiting 200ms for device to start rebooting...
[2025-10-05 22:51:31] [INFO] [SERIAL] Connection attempt #1 (remaining timeout: 14.8s)
[2025-10-05 22:51:31] [INFO] [SERIAL] Connection attempt #1 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:31] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:31] [INFO] [SERIAL] Connection attempt #2 (remaining timeout: 14.6s)
[2025-10-05 22:51:31] [INFO] [SERIAL] Connection attempt #2 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:31] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #3 (remaining timeout: 14.4s)
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #3 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:32] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #4 (remaining timeout: 14.2s)
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #4 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:32] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #5 (remaining timeout: 14.0s)
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #5 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:32] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #6 (remaining timeout: 13.8s)
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #6 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:32] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:32] [INFO] [SERIAL] Connection attempt #7 (remaining timeout: 13.6s)
[2025-10-05 22:51:32] [INFO] [SERIAL] Connected to port COM11 on attempt #7
[2025-10-05 22:51:33] [INFO] [SERIAL RX] Monitoring for ready token: 'SYSTEM READY'
[2025-10-05 22:51:35] [INFO] [SERIAL RX] Chunk #1: 393 bytes
[2025-10-05 22:51:35] [INFO] [SERIAL RX] Content: [INFO] Core 0 initializing...<CR><LF>
	[ECHO] Device Serial : SN-369366060325<CR><LF>
	[ECHO] Firmware Ver  : 1.0.0<CR><LF>
	[ECHO] Core voltage  : 1.15 V (vsel = 1)<CR><LF>
	[ECHO] Clock Sources :<CR><LF>
	[ECHO] 	SYS: 200000000 Hz (200 MHz)<CR><LF>
	[ECHO] 	USB: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	PER: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	ADC: 48000000 Hz (48 MHz)<CR><LF>
[INFO] ADC initializing<CR><LF>
VREG register: 0x000010D1<CR><LF>
[INFO] I2C scanning...<CR><LF>

[2025-10-05 22:51:35] [INFO] [SERIAL RX] Chunk #2: 64 bytes
[2025-10-05 22:51:35] [INFO] [SERIAL RX] Content: [INFO] EEPROM initializing...<CR><LF>
[INFO] MCP23017 initializing...<CR><LF>

[2025-10-05 22:51:38] [INFO] [SERIAL RX] Chunk #3: 162 bytes
[2025-10-05 22:51:38] [INFO] [SERIAL RX] Content: [INFO] Headless mode, skipping display initialization<CR><LF>
[INFO] Initializing HLW8032...<CR><LF>
[INFO] Initializing buttons...<CR><LF>
[INFO] Loaded network config from EEPROM.<CR><LF>

[2025-10-05 22:51:39] [INFO] [SERIAL RX] Chunk #4: 456 bytes
[2025-10-05 22:51:39] [INFO] [SERIAL RX] Content: [INFO] W5500 version: 0x04<CR><LF>
[INFO] W5500 PHY link is up<CR><LF>
	[ECHO] =============================================<CR><LF>
	[ECHO]  W5500 network configuration : static<CR><LF>
	[ECHO]  MAC         : 00:08:DC:BE:EF:91<CR><LF>
	[ECHO]  IP          : 192.168.0.11<CR><LF>
	[ECHO]  Subnet Mask : 255.255.255.0<CR><LF>
	[ECHO]  Gateway     : 192.168.0.1<CR><LF>
	[ECHO]  DNS         : 8.8.8.8<CR><LF>
	[ECHO] =============================================<CR><LF>
<CR><LF>
SYSTEM READY<CR><LF>
[INFO] - SNMP : Start SNMP Agent Daemon<CR><LF>

[2025-10-05 22:51:39] [INFO] [SERIAL] Ready token 'SYSTEM READY' detected!
[2025-10-05 22:51:39] [INFO] [SERIAL RX] Total response: 1075 bytes in 4 chunks
[2025-10-05 22:51:39] [INFO] [SERIAL RX] Elapsed time: 8.298s
[2025-10-05 22:51:39] [INFO] [SERIAL RX] Full response:
[2025-10-05 22:51:39] [INFO] [INFO] Core 0 initializing...\r\n
	[ECHO] Device Serial : SN-369366060325\r\n
	[ECHO] Firmware Ver  : 1.0.0\r\n
	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
	[ECHO] Clock Sources :\r\n
	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
[INFO] ADC initializing\r\n
VREG register: 0x000010D1\r\n
[INFO] I2C scanning...\r\n
[INFO] EEPROM initializing...\r\n
[INFO] MCP23017 initializing...\r\n
[INFO] Headless mode, skipping display initialization\r\n
[INFO] Initializing HLW8032...\r\n
[INFO] Initializing buttons...\r\n
[INFO] Loaded network config from EEPROM.\r\n
[INFO] W5500 version: 0x04\r\n
[INFO] W5500 PHY link is up\r\n
	[ECHO] =============================================\r\n
	[ECHO]  W5500 network configuration : static\r\n
	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
	[ECHO]  IP          : 192.168.0.11\r\n
	[ECHO]  Subnet Mask : 255.255.255.0\r\n
	[ECHO]  Gateway     : 192.168.0.1\r\n
	[ECHO]  DNS         : 8.8.8.8\r\n
	[ECHO] =============================================\r\n
\r\n
SYSTEM READY\r\n
[INFO] - SNMP : Start SNMP Agent Daemon\r\n

[2025-10-05 22:51:39] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:39] [INFO]   0000  5B 49 4E 46 4F 5D 20 43 6F 72 65 20 30 20 69 6E   |[INFO] Core 0 in|
  0010  69 74 69 61 6C 69 7A 69 6E 67 2E 2E 2E 0D 0A 09   |itializing......|
  0020  5B 45 43 48 4F 5D 20 44 65 76 69 63 65 20 53 65   |[ECHO] Device Se|
  0030  72 69 61 6C 20 3A 20 53 4E 2D 33 36 39 33 36 36   |rial : SN-369366|
  0040  30 36 30 33 32 35 0D 0A 09 5B 45 43 48 4F 5D 20   |060325...[ECHO] |
  0050  46 69 72 6D 77 61 72 65 20 56 65 72 20 20 3A 20   |Firmware Ver  : |
  0060  31 2E 30 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 43   |1.0.0...[ECHO] C|
  0070  6F 72 65 20 76 6F 6C 74 61 67 65 20 20 3A 20 31   |ore voltage  : 1|
  0080  2E 31 35 20 56 20 28 76 73 65 6C 20 3D 20 31 29   |.15 V (vsel = 1)|
  0090  0D 0A 09 5B 45 43 48 4F 5D 20 43 6C 6F 63 6B 20   |...[ECHO] Clock |
  00A0  53 6F 75 72 63 65 73 20 3A 0D 0A 09 5B 45 43 48   |Sources :...[ECH|
  00B0  4F 5D 20 09 53 59 53 3A 20 32 30 30 30 30 30 30   |O] .SYS: 2000000|
  00C0  30 30 20 48 7A 20 28 32 30 30 20 4D 48 7A 29 0D   |00 Hz (200 MHz).|
  00D0  0A 09 5B 45 43 48 4F 5D 20 09 55 53 42 3A 20 34   |..[ECHO] .USB: 4|
  00E0  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  00F0  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 50 45   |Hz)...[ECHO] .PE|
  0100  52 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |R: 48000000 Hz (|
  0110  34 38 20 4D 48 7A 29 0D 0A 09 5B 45 43 48 4F 5D   |48 MHz)...[ECHO]|
  0120  20 09 41 44 43 3A 20 34 38 30 30 30 30 30 30 20   | .ADC: 48000000 |
  0130  48 7A 20 28 34 38 20 4D 48 7A 29 0D 0A 5B 49 4E   |Hz (48 MHz)..[IN|
  0140  46 4F 5D 20 41 44 43 20 69 6E 69 74 69 61 6C 69   |FO] ADC initiali|
  0150  7A 69 6E 67 0D 0A 56 52 45 47 20 72 65 67 69 73   |zing..VREG regis|
  0160  74 65 72 3A 20 30 78 30 30 30 30 31 30 44 31 0D   |ter: 0x000010D1.|
  0170  0A 5B 49 4E 46 4F 5D 20 49 32 43 20 73 63 61 6E   |.[INFO] I2C scan|
  0180  6E 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |ning.....[INFO] |
  0190  45 45 50 52 4F 4D 20 69 6E 69 74 69 61 6C 69 7A   |EEPROM initializ|
  01A0  69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20 4D   |ing.....[INFO] M|
  01B0  43 50 32 33 30 31 37 20 69 6E 69 74 69 61 6C 69   |CP23017 initiali|
  01C0  7A 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |zing.....[INFO] |
  01D0  48 65 61 64 6C 65 73 73 20 6D 6F 64 65 2C 20 73   |Headless mode, s|
  01E0  6B 69 70 70 69 6E 67 20 64 69 73 70 6C 61 79 20   |kipping display |
  01F0  69 6E 69 74 69 61 6C 69 7A 61 74 69 6F 6E 0D 0A   |initialization..|
  0200  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0210  69 6E 67 20 48 4C 57 38 30 33 32 2E 2E 2E 0D 0A   |ing HLW8032.....|
  0220  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0230  69 6E 67 20 62 75 74 74 6F 6E 73 2E 2E 2E 0D 0A   |ing buttons.....|
  0240  5B 49 4E 46 4F 5D 20 4C 6F 61 64 65 64 20 6E 65   |[INFO] Loaded ne|
  0250  74 77 6F 72 6B 20 63 6F 6E 66 69 67 20 66 72 6F   |twork config fro|
  0260  6D 20 45 45 50 52 4F 4D 2E 0D 0A 5B 49 4E 46 4F   |m EEPROM...[INFO|
  0270  5D 20 57 35 35 30 30 20 76 65 72 73 69 6F 6E 3A   |] W5500 version:|
  0280  20 30 78 30 34 0D 0A 5B 49 4E 46 4F 5D 20 57 35   | 0x04..[INFO] W5|
  0290  35 30 30 20 50 48 59 20 6C 69 6E 6B 20 69 73 20   |500 PHY link is |
  02A0  75 70 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D   |up...[ECHO] ====|
  02B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 09 5B 45 43 48   |=========...[ECH|
  02E0  4F 5D 20 20 57 35 35 30 30 20 6E 65 74 77 6F 72   |O]  W5500 networ|
  02F0  6B 20 63 6F 6E 66 69 67 75 72 61 74 69 6F 6E 20   |k configuration |
  0300  3A 20 73 74 61 74 69 63 0D 0A 09 5B 45 43 48 4F   |: static...[ECHO|
  0310  5D 20 20 4D 41 43 20 20 20 20 20 20 20 20 20 3A   |]  MAC         :|
  0320  20 30 30 3A 30 38 3A 44 43 3A 42 45 3A 45 46 3A   | 00:08:DC:BE:EF:|
  0330  39 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 49 50 20   |91...[ECHO]  IP |
  0340  20 20 20 20 20 20 20 20 20 3A 20 31 39 32 2E 31   |         : 192.1|
  0350  36 38 2E 30 2E 31 31 0D 0A 09 5B 45 43 48 4F 5D   |68.0.11...[ECHO]|
  0360  20 20 53 75 62 6E 65 74 20 4D 61 73 6B 20 3A 20   |  Subnet Mask : |
  0370  32 35 35 2E 32 35 35 2E 32 35 35 2E 30 0D 0A 09   |255.255.255.0...|
  0380  5B 45 43 48 4F 5D 20 20 47 61 74 65 77 61 79 20   |[ECHO]  Gateway |
  0390  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 30 2E   |    : 192.168.0.|
  03A0  31 0D 0A 09 5B 45 43 48 4F 5D 20 20 44 4E 53 20   |1...[ECHO]  DNS |
  03B0  20 20 20 20 20 20 20 20 3A 20 38 2E 38 2E 38 2E   |        : 8.8.8.|
  03C0  38 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D   |8...[ECHO] =====|
  03D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03F0  3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 0D 0A 53 59 53 54   |========....SYST|
  0400  45 4D 20 52 45 41 44 59 0D 0A 5B 49 4E 46 4F 5D   |EM READY..[INFO]|
  0410  20 2D 20 53 4E 4D 50 20 3A 20 53 74 61 72 74 20   | - SNMP : Start |
  0420  53 4E 4D 50 20 41 67 65 6E 74 20 44 61 65 6D 6F   |SNMP Agent Daemo|
  0430  6E 0D 0A                                          |n..|
[2025-10-05 22:51:39] [INFO] [SERIAL] Device ready! Returning True
[2025-10-05 22:51:39] [INFO] [SERIAL] Closed port COM11
[2025-10-05 22:51:39] [PASS] PRE-STEP 1 completed successfully

STEP 1 Set custom network configuration

PASS

Started	Finished
2025-10-05 22:51:39	2025-10-05 22:51:50

Substeps

STEP 1.1 Set custom network config

PASS

Started	Finished
2025-10-05 22:51:39	2025-10-05 22:51:48

Log

[2025-10-05 22:51:39] [STEP 1.1] Set custom network config
[2025-10-05 22:51:39] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:39] [INFO] [SERIAL]   port=COM11, command='CONFIG_NETWORK 192.168.0.12$255.255.255.0$192.168.1.1$1.1.1.1', baudrate=115200, timeout=1.0s
[2025-10-05 22:51:39] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:39] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=1.0s, write_timeout=2.0s
[2025-10-05 22:51:39] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:39] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:39] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:39] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:39] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=1.0s
[2025-10-05 22:51:39] [INFO] [SERIAL TX] Sending command: 'CONFIG_NETWORK 192.168.0.12$255.255.255.0$192.168.1.1$1.1.1.1'
[2025-10-05 22:51:39] [INFO] [SERIAL TX] Payload length: 63 bytes (including CR+LF)
[2025-10-05 22:51:39] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:39] [INFO]   0000  43 4F 4E 46 49 47 5F 4E 45 54 57 4F 52 4B 20 31   |CONFIG_NETWORK 1|
  0010  39 32 2E 31 36 38 2E 30 2E 31 32 24 32 35 35 2E   |92.168.0.12$255.|
  0020  32 35 35 2E 32 35 35 2E 30 24 31 39 32 2E 31 36   |255.255.0$192.16|
  0030  38 2E 31 2E 31 24 31 2E 31 2E 31 2E 31 0D 0A      |8.1.1$1.1.1.1..|
[2025-10-05 22:51:39] [INFO] [SERIAL TX] Wrote 63 bytes to port
[2025-10-05 22:51:39] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:39] [INFO] [SERIAL RX] Starting to read response (timeout=1.0s)
[2025-10-05 22:51:39] [INFO] [SERIAL RX] Chunk #1: received 93 bytes (elapsed: 0.021s, total: 93 bytes)
[2025-10-05 22:51:40] [INFO] [SERIAL RX] Chunk #2: received 130 bytes (elapsed: 0.346s, total: 223 bytes)
[2025-10-05 22:51:40] [ERROR] [SERIAL ERROR] Exception during send_command:
[2025-10-05 22:51:40] [ERROR] [SERIAL ERROR]   Type: SerialException
[2025-10-05 22:51:40] [ERROR] [SERIAL ERROR]   Message: ClearCommError failed (PermissionError(13, 'The device does not recognize the command.', None, 22))
[2025-10-05 22:51:40] [ERROR] [SERIAL ERROR]   Port: COM11, Command: 'CONFIG_NETWORK 192.168.0.12$255.255.255.0$192.168.1.1$1.1.1.1'
[2025-10-05 22:51:40] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:40] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:40] [INFO] [SERIAL] wait_for_reboot_and_ready() called
[2025-10-05 22:51:40] [INFO] [SERIAL]   port=COM11, ready_token='SYSTEM READY', baudrate=115200, timeout=20s
[2025-10-05 22:51:40] [INFO] [SERIAL] Waiting 200ms for device to start rebooting...
[2025-10-05 22:51:40] [INFO] [SERIAL] Connection attempt #1 (remaining timeout: 19.8s)
[2025-10-05 22:51:40] [INFO] [SERIAL] Connection attempt #1 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:40] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:40] [INFO] [SERIAL] Connection attempt #2 (remaining timeout: 19.6s)
[2025-10-05 22:51:40] [INFO] [SERIAL] Connection attempt #2 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:40] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:40] [INFO] [SERIAL] Connection attempt #3 (remaining timeout: 19.4s)
[2025-10-05 22:51:40] [INFO] [SERIAL] Connection attempt #3 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:40] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:41] [INFO] [SERIAL] Connection attempt #4 (remaining timeout: 19.2s)
[2025-10-05 22:51:41] [INFO] [SERIAL] Connection attempt #4 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:41] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:41] [INFO] [SERIAL] Connection attempt #5 (remaining timeout: 19.0s)
[2025-10-05 22:51:41] [INFO] [SERIAL] Connection attempt #5 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:41] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:41] [INFO] [SERIAL] Connection attempt #6 (remaining timeout: 18.8s)
[2025-10-05 22:51:41] [INFO] [SERIAL] Connection attempt #6 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:41] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:41] [INFO] [SERIAL] Connection attempt #7 (remaining timeout: 18.6s)
[2025-10-05 22:51:41] [INFO] [SERIAL] Connected to port COM11 on attempt #7
[2025-10-05 22:51:41] [INFO] [SERIAL RX] Monitoring for ready token: 'SYSTEM READY'
[2025-10-05 22:51:44] [INFO] [SERIAL RX] Chunk #1: 393 bytes
[2025-10-05 22:51:44] [INFO] [SERIAL RX] Content: [INFO] Core 0 initializing...<CR><LF>
	[ECHO] Device Serial : SN-369366060325<CR><LF>
	[ECHO] Firmware Ver  : 1.0.0<CR><LF>
	[ECHO] Core voltage  : 1.15 V (vsel = 1)<CR><LF>
	[ECHO] Clock Sources :<CR><LF>
	[ECHO] 	SYS: 200000000 Hz (200 MHz)<CR><LF>
	[ECHO] 	USB: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	PER: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	ADC: 48000000 Hz (48 MHz)<CR><LF>
[INFO] ADC initializing<CR><LF>
VREG register: 0x000010D1<CR><LF>
[INFO] I2C scanning...<CR><LF>

[2025-10-05 22:51:44] [INFO] [SERIAL RX] Chunk #2: 64 bytes
[2025-10-05 22:51:44] [INFO] [SERIAL RX] Content: [INFO] EEPROM initializing...<CR><LF>
[INFO] MCP23017 initializing...<CR><LF>

[2025-10-05 22:51:46] [INFO] [SERIAL RX] Chunk #3: 162 bytes
[2025-10-05 22:51:46] [INFO] [SERIAL RX] Content: [INFO] Headless mode, skipping display initialization<CR><LF>
[INFO] Initializing HLW8032...<CR><LF>
[INFO] Initializing buttons...<CR><LF>
[INFO] Loaded network config from EEPROM.<CR><LF>

[2025-10-05 22:51:48] [INFO] [SERIAL RX] Chunk #4: 456 bytes
[2025-10-05 22:51:48] [INFO] [SERIAL RX] Content: [INFO] W5500 version: 0x04<CR><LF>
[INFO] W5500 PHY link is up<CR><LF>
	[ECHO] =============================================<CR><LF>
	[ECHO]  W5500 network configuration : static<CR><LF>
	[ECHO]  MAC         : 00:08:DC:BE:EF:91<CR><LF>
	[ECHO]  IP          : 192.168.0.12<CR><LF>
	[ECHO]  Subnet Mask : 255.255.255.0<CR><LF>
	[ECHO]  Gateway     : 192.168.1.1<CR><LF>
	[ECHO]  DNS         : 1.1.1.1<CR><LF>
	[ECHO] =============================================<CR><LF>
<CR><LF>
SYSTEM READY<CR><LF>
[INFO] - SNMP : Start SNMP Agent Daemon<CR><LF>

[2025-10-05 22:51:48] [INFO] [SERIAL] Ready token 'SYSTEM READY' detected!
[2025-10-05 22:51:48] [INFO] [SERIAL RX] Total response: 1075 bytes in 4 chunks
[2025-10-05 22:51:48] [INFO] [SERIAL RX] Elapsed time: 8.301s
[2025-10-05 22:51:48] [INFO] [SERIAL RX] Full response:
[2025-10-05 22:51:48] [INFO] [INFO] Core 0 initializing...\r\n
	[ECHO] Device Serial : SN-369366060325\r\n
	[ECHO] Firmware Ver  : 1.0.0\r\n
	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
	[ECHO] Clock Sources :\r\n
	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
[INFO] ADC initializing\r\n
VREG register: 0x000010D1\r\n
[INFO] I2C scanning...\r\n
[INFO] EEPROM initializing...\r\n
[INFO] MCP23017 initializing...\r\n
[INFO] Headless mode, skipping display initialization\r\n
[INFO] Initializing HLW8032...\r\n
[INFO] Initializing buttons...\r\n
[INFO] Loaded network config from EEPROM.\r\n
[INFO] W5500 version: 0x04\r\n
[INFO] W5500 PHY link is up\r\n
	[ECHO] =============================================\r\n
	[ECHO]  W5500 network configuration : static\r\n
	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
	[ECHO]  IP          : 192.168.0.12\r\n
	[ECHO]  Subnet Mask : 255.255.255.0\r\n
	[ECHO]  Gateway     : 192.168.1.1\r\n
	[ECHO]  DNS         : 1.1.1.1\r\n
	[ECHO] =============================================\r\n
\r\n
SYSTEM READY\r\n
[INFO] - SNMP : Start SNMP Agent Daemon\r\n

[2025-10-05 22:51:48] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:48] [INFO]   0000  5B 49 4E 46 4F 5D 20 43 6F 72 65 20 30 20 69 6E   |[INFO] Core 0 in|
  0010  69 74 69 61 6C 69 7A 69 6E 67 2E 2E 2E 0D 0A 09   |itializing......|
  0020  5B 45 43 48 4F 5D 20 44 65 76 69 63 65 20 53 65   |[ECHO] Device Se|
  0030  72 69 61 6C 20 3A 20 53 4E 2D 33 36 39 33 36 36   |rial : SN-369366|
  0040  30 36 30 33 32 35 0D 0A 09 5B 45 43 48 4F 5D 20   |060325...[ECHO] |
  0050  46 69 72 6D 77 61 72 65 20 56 65 72 20 20 3A 20   |Firmware Ver  : |
  0060  31 2E 30 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 43   |1.0.0...[ECHO] C|
  0070  6F 72 65 20 76 6F 6C 74 61 67 65 20 20 3A 20 31   |ore voltage  : 1|
  0080  2E 31 35 20 56 20 28 76 73 65 6C 20 3D 20 31 29   |.15 V (vsel = 1)|
  0090  0D 0A 09 5B 45 43 48 4F 5D 20 43 6C 6F 63 6B 20   |...[ECHO] Clock |
  00A0  53 6F 75 72 63 65 73 20 3A 0D 0A 09 5B 45 43 48   |Sources :...[ECH|
  00B0  4F 5D 20 09 53 59 53 3A 20 32 30 30 30 30 30 30   |O] .SYS: 2000000|
  00C0  30 30 20 48 7A 20 28 32 30 30 20 4D 48 7A 29 0D   |00 Hz (200 MHz).|
  00D0  0A 09 5B 45 43 48 4F 5D 20 09 55 53 42 3A 20 34   |..[ECHO] .USB: 4|
  00E0  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  00F0  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 50 45   |Hz)...[ECHO] .PE|
  0100  52 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |R: 48000000 Hz (|
  0110  34 38 20 4D 48 7A 29 0D 0A 09 5B 45 43 48 4F 5D   |48 MHz)...[ECHO]|
  0120  20 09 41 44 43 3A 20 34 38 30 30 30 30 30 30 20   | .ADC: 48000000 |
  0130  48 7A 20 28 34 38 20 4D 48 7A 29 0D 0A 5B 49 4E   |Hz (48 MHz)..[IN|
  0140  46 4F 5D 20 41 44 43 20 69 6E 69 74 69 61 6C 69   |FO] ADC initiali|
  0150  7A 69 6E 67 0D 0A 56 52 45 47 20 72 65 67 69 73   |zing..VREG regis|
  0160  74 65 72 3A 20 30 78 30 30 30 30 31 30 44 31 0D   |ter: 0x000010D1.|
  0170  0A 5B 49 4E 46 4F 5D 20 49 32 43 20 73 63 61 6E   |.[INFO] I2C scan|
  0180  6E 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |ning.....[INFO] |
  0190  45 45 50 52 4F 4D 20 69 6E 69 74 69 61 6C 69 7A   |EEPROM initializ|
  01A0  69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20 4D   |ing.....[INFO] M|
  01B0  43 50 32 33 30 31 37 20 69 6E 69 74 69 61 6C 69   |CP23017 initiali|
  01C0  7A 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |zing.....[INFO] |
  01D0  48 65 61 64 6C 65 73 73 20 6D 6F 64 65 2C 20 73   |Headless mode, s|
  01E0  6B 69 70 70 69 6E 67 20 64 69 73 70 6C 61 79 20   |kipping display |
  01F0  69 6E 69 74 69 61 6C 69 7A 61 74 69 6F 6E 0D 0A   |initialization..|
  0200  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0210  69 6E 67 20 48 4C 57 38 30 33 32 2E 2E 2E 0D 0A   |ing HLW8032.....|
  0220  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0230  69 6E 67 20 62 75 74 74 6F 6E 73 2E 2E 2E 0D 0A   |ing buttons.....|
  0240  5B 49 4E 46 4F 5D 20 4C 6F 61 64 65 64 20 6E 65   |[INFO] Loaded ne|
  0250  74 77 6F 72 6B 20 63 6F 6E 66 69 67 20 66 72 6F   |twork config fro|
  0260  6D 20 45 45 50 52 4F 4D 2E 0D 0A 5B 49 4E 46 4F   |m EEPROM...[INFO|
  0270  5D 20 57 35 35 30 30 20 76 65 72 73 69 6F 6E 3A   |] W5500 version:|
  0280  20 30 78 30 34 0D 0A 5B 49 4E 46 4F 5D 20 57 35   | 0x04..[INFO] W5|
  0290  35 30 30 20 50 48 59 20 6C 69 6E 6B 20 69 73 20   |500 PHY link is |
  02A0  75 70 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D   |up...[ECHO] ====|
  02B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 09 5B 45 43 48   |=========...[ECH|
  02E0  4F 5D 20 20 57 35 35 30 30 20 6E 65 74 77 6F 72   |O]  W5500 networ|
  02F0  6B 20 63 6F 6E 66 69 67 75 72 61 74 69 6F 6E 20   |k configuration |
  0300  3A 20 73 74 61 74 69 63 0D 0A 09 5B 45 43 48 4F   |: static...[ECHO|
  0310  5D 20 20 4D 41 43 20 20 20 20 20 20 20 20 20 3A   |]  MAC         :|
  0320  20 30 30 3A 30 38 3A 44 43 3A 42 45 3A 45 46 3A   | 00:08:DC:BE:EF:|
  0330  39 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 49 50 20   |91...[ECHO]  IP |
  0340  20 20 20 20 20 20 20 20 20 3A 20 31 39 32 2E 31   |         : 192.1|
  0350  36 38 2E 30 2E 31 32 0D 0A 09 5B 45 43 48 4F 5D   |68.0.12...[ECHO]|
  0360  20 20 53 75 62 6E 65 74 20 4D 61 73 6B 20 3A 20   |  Subnet Mask : |
  0370  32 35 35 2E 32 35 35 2E 32 35 35 2E 30 0D 0A 09   |255.255.255.0...|
  0380  5B 45 43 48 4F 5D 20 20 47 61 74 65 77 61 79 20   |[ECHO]  Gateway |
  0390  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 31 2E   |    : 192.168.1.|
  03A0  31 0D 0A 09 5B 45 43 48 4F 5D 20 20 44 4E 53 20   |1...[ECHO]  DNS |
  03B0  20 20 20 20 20 20 20 20 3A 20 31 2E 31 2E 31 2E   |        : 1.1.1.|
  03C0  31 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D   |1...[ECHO] =====|
  03D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03F0  3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 0D 0A 53 59 53 54   |========....SYST|
  0400  45 4D 20 52 45 41 44 59 0D 0A 5B 49 4E 46 4F 5D   |EM READY..[INFO]|
  0410  20 2D 20 53 4E 4D 50 20 3A 20 53 74 61 72 74 20   | - SNMP : Start |
  0420  53 4E 4D 50 20 41 67 65 6E 74 20 44 61 65 6D 6F   |SNMP Agent Daemo|
  0430  6E 0D 0A                                          |n..|
[2025-10-05 22:51:48] [INFO] [SERIAL] Device ready! Returning True
[2025-10-05 22:51:48] [INFO] [SERIAL] Closed port COM11
[2025-10-05 22:51:48] [PASS] STEP 1.1 completed successfully

STEP 1.2 Verify custom IP

PASS

Started	Finished
2025-10-05 22:51:48	2025-10-05 22:51:49

Log

[2025-10-05 22:51:48] [STEP 1.2] Verify custom IP
[2025-10-05 22:51:48] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:48] [INFO] [SERIAL]   port=COM11, command='NETINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:48] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:48] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:48] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:48] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:48] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:48] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:48] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:48] [INFO] [SERIAL TX] Sending command: 'NETINFO'
[2025-10-05 22:51:48] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:51:48] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:48] [INFO]   0000  4E 45 54 49 4E 46 4F 0D 0A                        |NETINFO..|
[2025-10-05 22:51:48] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:51:48] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:48] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:48] [INFO] [SERIAL RX] Chunk #1: received 93 bytes (elapsed: 0.020s, total: 93 bytes)
[2025-10-05 22:51:49] [INFO] [SERIAL RX] Chunk #2: received 407 bytes (elapsed: 0.348s, total: 500 bytes)
[2025-10-05 22:51:49] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:49] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:49] [INFO] [SERIAL RX]   Total bytes: 500
[2025-10-05 22:51:49] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:51:49] [INFO] [SERIAL RX]   Total time: 0.849s
[2025-10-05 22:51:49] [INFO] [SERIAL RX] Decoded text (500 characters):
[2025-10-05 22:51:49] [INFO]   [INFO] HTTP server listening on port 80\r\n
  [INFO] - [1] UDP Socket for SNMP Agent, port [161]\r\n
  	[ECHO] Received CMD: "NETINFO"\r\n
  	[ECHO] NETWORK INFORMATION:\r\n
  	[ECHO] =============================================\r\n
  	[ECHO]  W5500 network configuration : static\r\n
  	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
  	[ECHO]  IP          : 192.168.0.12\r\n
  	[ECHO]  Subnet Mask : 255.255.255.0\r\n
  	[ECHO]  Gateway     : 192.168.1.1\r\n
  	[ECHO]  DNS         : 1.1.1.1\r\n
  	[ECHO] =============================================\r\n
  \r\n
  
[2025-10-05 22:51:49] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:49] [INFO]   0000  5B 49 4E 46 4F 5D 20 48 54 54 50 20 73 65 72 76   |[INFO] HTTP serv|
  0010  65 72 20 6C 69 73 74 65 6E 69 6E 67 20 6F 6E 20   |er listening on |
  0020  70 6F 72 74 20 38 30 0D 0A 5B 49 4E 46 4F 5D 20   |port 80..[INFO] |
  0030  2D 20 5B 31 5D 20 55 44 50 20 53 6F 63 6B 65 74   |- [1] UDP Socket|
  0040  20 66 6F 72 20 53 4E 4D 50 20 41 67 65 6E 74 2C   | for SNMP Agent,|
  0050  20 70 6F 72 74 20 5B 31 36 31 5D 0D 0A 09 5B 45   | port [161]...[E|
  0060  43 48 4F 5D 20 52 65 63 65 69 76 65 64 20 43 4D   |CHO] Received CM|
  0070  44 3A 20 22 4E 45 54 49 4E 46 4F 22 0D 0A 09 5B   |D: "NETINFO"...[|
  0080  45 43 48 4F 5D 20 4E 45 54 57 4F 52 4B 20 49 4E   |ECHO] NETWORK IN|
  0090  46 4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09 5B 45 43   |FORMATION:...[EC|
  00A0  48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |HO] ============|
  00B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00D0  3D 0D 0A 09 5B 45 43 48 4F 5D 20 20 57 35 35 30   |=...[ECHO]  W550|
  00E0  30 20 6E 65 74 77 6F 72 6B 20 63 6F 6E 66 69 67   |0 network config|
  00F0  75 72 61 74 69 6F 6E 20 3A 20 73 74 61 74 69 63   |uration : static|
  0100  0D 0A 09 5B 45 43 48 4F 5D 20 20 4D 41 43 20 20   |...[ECHO]  MAC  |
  0110  20 20 20 20 20 20 20 3A 20 30 30 3A 30 38 3A 44   |       : 00:08:D|
  0120  43 3A 42 45 3A 45 46 3A 39 31 0D 0A 09 5B 45 43   |C:BE:EF:91...[EC|
  0130  48 4F 5D 20 20 49 50 20 20 20 20 20 20 20 20 20   |HO]  IP         |
  0140  20 3A 20 31 39 32 2E 31 36 38 2E 30 2E 31 32 0D   | : 192.168.0.12.|
  0150  0A 09 5B 45 43 48 4F 5D 20 20 53 75 62 6E 65 74   |..[ECHO]  Subnet|
  0160  20 4D 61 73 6B 20 3A 20 32 35 35 2E 32 35 35 2E   | Mask : 255.255.|
  0170  32 35 35 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 20   |255.0...[ECHO]  |
  0180  47 61 74 65 77 61 79 20 20 20 20 20 3A 20 31 39   |Gateway     : 19|
  0190  32 2E 31 36 38 2E 31 2E 31 0D 0A 09 5B 45 43 48   |2.168.1.1...[ECH|
  01A0  4F 5D 20 20 44 4E 53 20 20 20 20 20 20 20 20 20   |O]  DNS         |
  01B0  3A 20 31 2E 31 2E 31 2E 31 0D 0A 09 5B 45 43 48   |: 1.1.1.1...[ECH|
  01C0  4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |O] =============|
  01D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01F0  0D 0A 0D 0A                                       |....|
[2025-10-05 22:51:49] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:49] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:49] [PASS] STEP 1.2 completed successfully

STEP 1.3 Verify custom Gateway

PASS

Started	Finished
2025-10-05 22:51:49	2025-10-05 22:51:50

Log

[2025-10-05 22:51:49] [STEP 1.3] Verify custom Gateway
[2025-10-05 22:51:49] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:49] [INFO] [SERIAL]   port=COM11, command='NETINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:49] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:49] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:49] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:49] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:49] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:49] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:49] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:49] [INFO] [SERIAL TX] Sending command: 'NETINFO'
[2025-10-05 22:51:49] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:51:49] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:49] [INFO]   0000  4E 45 54 49 4E 46 4F 0D 0A                        |NETINFO..|
[2025-10-05 22:51:49] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:51:49] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:49] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:49] [INFO] [SERIAL RX] Chunk #1: received 407 bytes (elapsed: 0.203s, total: 407 bytes)
[2025-10-05 22:51:50] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:50] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:50] [INFO] [SERIAL RX]   Total bytes: 407
[2025-10-05 22:51:50] [INFO] [SERIAL RX]   Chunks received: 1
[2025-10-05 22:51:50] [INFO] [SERIAL RX]   Total time: 0.704s
[2025-10-05 22:51:50] [INFO] [SERIAL RX] Decoded text (407 characters):
[2025-10-05 22:51:50] [INFO]   	[ECHO] Received CMD: "NETINFO"\r\n
  	[ECHO] NETWORK INFORMATION:\r\n
  	[ECHO] =============================================\r\n
  	[ECHO]  W5500 network configuration : static\r\n
  	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
  	[ECHO]  IP          : 192.168.0.12\r\n
  	[ECHO]  Subnet Mask : 255.255.255.0\r\n
  	[ECHO]  Gateway     : 192.168.1.1\r\n
  	[ECHO]  DNS         : 1.1.1.1\r\n
  	[ECHO] =============================================\r\n
  \r\n
  
[2025-10-05 22:51:50] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:50] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 4E 45 54 49 4E 46 4F 22 0D   | CMD: "NETINFO".|
  0020  0A 09 5B 45 43 48 4F 5D 20 4E 45 54 57 4F 52 4B   |..[ECHO] NETWORK|
  0030  20 49 4E 46 4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09   | INFORMATION:...|
  0040  5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D   |[ECHO] =========|
  0050  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0060  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0070  3D 3D 3D 3D 0D 0A 09 5B 45 43 48 4F 5D 20 20 57   |====...[ECHO]  W|
  0080  35 35 30 30 20 6E 65 74 77 6F 72 6B 20 63 6F 6E   |5500 network con|
  0090  66 69 67 75 72 61 74 69 6F 6E 20 3A 20 73 74 61   |figuration : sta|
  00A0  74 69 63 0D 0A 09 5B 45 43 48 4F 5D 20 20 4D 41   |tic...[ECHO]  MA|
  00B0  43 20 20 20 20 20 20 20 20 20 3A 20 30 30 3A 30   |C         : 00:0|
  00C0  38 3A 44 43 3A 42 45 3A 45 46 3A 39 31 0D 0A 09   |8:DC:BE:EF:91...|
  00D0  5B 45 43 48 4F 5D 20 20 49 50 20 20 20 20 20 20   |[ECHO]  IP      |
  00E0  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 30 2E   |    : 192.168.0.|
  00F0  31 32 0D 0A 09 5B 45 43 48 4F 5D 20 20 53 75 62   |12...[ECHO]  Sub|
  0100  6E 65 74 20 4D 61 73 6B 20 3A 20 32 35 35 2E 32   |net Mask : 255.2|
  0110  35 35 2E 32 35 35 2E 30 0D 0A 09 5B 45 43 48 4F   |55.255.0...[ECHO|
  0120  5D 20 20 47 61 74 65 77 61 79 20 20 20 20 20 3A   |]  Gateway     :|
  0130  20 31 39 32 2E 31 36 38 2E 31 2E 31 0D 0A 09 5B   | 192.168.1.1...[|
  0140  45 43 48 4F 5D 20 20 44 4E 53 20 20 20 20 20 20   |ECHO]  DNS      |
  0150  20 20 20 3A 20 31 2E 31 2E 31 2E 31 0D 0A 09 5B   |   : 1.1.1.1...[|
  0160  45 43 48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |ECHO] ==========|
  0170  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0180  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0190  3D 3D 3D 0D 0A 0D 0A                              |===....|
[2025-10-05 22:51:50] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:50] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:50] [PASS] STEP 1.3 completed successfully

STEP 2 Set alternating channel states (odd ON, even OFF)

PASS

Started	Finished
2025-10-05 22:51:50	2025-10-05 22:51:57

Substeps

STEP 2.1 Set CH1 to ON

PASS

Started	Finished
2025-10-05 22:51:50	2025-10-05 22:51:51

Log

[2025-10-05 22:51:50] [STEP 2.1] Set CH1 to ON
[2025-10-05 22:51:50] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:50] [INFO] [SERIAL]   port=COM11, command='SET_CH 1 ON', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:50] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:50] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:50] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:50] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:50] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:50] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:50] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:50] [INFO] [SERIAL TX] Sending command: 'SET_CH 1 ON'
[2025-10-05 22:51:50] [INFO] [SERIAL TX] Payload length: 13 bytes (including CR+LF)
[2025-10-05 22:51:50] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:50] [INFO]   0000  53 45 54 5F 43 48 20 31 20 4F 4E 0D 0A            |SET_CH 1 ON..|
[2025-10-05 22:51:50] [INFO] [SERIAL TX] Wrote 13 bytes to port
[2025-10-05 22:51:50] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:50] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:50] [INFO] [SERIAL RX] Chunk #1: received 111 bytes (elapsed: 0.204s, total: 111 bytes)
[2025-10-05 22:51:50] [INFO] [SERIAL RX] Chunk #2: received 30 bytes (elapsed: 0.215s, total: 141 bytes)
[2025-10-05 22:51:51] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:51] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:51] [INFO] [SERIAL RX]   Total bytes: 141
[2025-10-05 22:51:51] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:51:51] [INFO] [SERIAL RX]   Total time: 0.718s
[2025-10-05 22:51:51] [INFO] [SERIAL RX] Decoded text (141 characters):
[2025-10-05 22:51:51] [INFO]   	[ECHO] Received CMD: "SET_CH 1 ON"\r\n
  [INFO] SET_RELAY[1] t=10484423 us tag=<UART Command Handler> pin=0 val=1\r\n
  	[ECHO] OK: Channel 1 set ON\r\n
  
[2025-10-05 22:51:51] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:51] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 31 20   | CMD: "SET_CH 1 |
  0020  4F 4E 22 0D 0A 5B 49 4E 46 4F 5D 20 53 45 54 5F   |ON"..[INFO] SET_|
  0030  52 45 4C 41 59 5B 31 5D 20 74 3D 31 30 34 38 34   |RELAY[1] t=10484|
  0040  34 32 33 20 75 73 20 74 61 67 3D 3C 55 41 52 54   |423 us tag=<UART|
  0050  20 43 6F 6D 6D 61 6E 64 20 48 61 6E 64 6C 65 72   | Command Handler|
  0060  3E 20 70 69 6E 3D 30 20 76 61 6C 3D 31 0D 0A 09   |> pin=0 val=1...|
  0070  5B 45 43 48 4F 5D 20 4F 4B 3A 20 43 68 61 6E 6E   |[ECHO] OK: Chann|
  0080  65 6C 20 31 20 73 65 74 20 4F 4E 0D 0A            |el 1 set ON..|
[2025-10-05 22:51:51] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:51] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:51] [PASS] STEP 2.1 completed successfully

STEP 2.2 Set CH2 to OFF

PASS

Started	Finished
2025-10-05 22:51:51	2025-10-05 22:51:52

Log

[2025-10-05 22:51:51] [STEP 2.2] Set CH2 to OFF
[2025-10-05 22:51:51] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:51] [INFO] [SERIAL]   port=COM11, command='SET_CH 2 OFF', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:51] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:51] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:51] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:51] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:51] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:51] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:51] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:51] [INFO] [SERIAL TX] Sending command: 'SET_CH 2 OFF'
[2025-10-05 22:51:51] [INFO] [SERIAL TX] Payload length: 14 bytes (including CR+LF)
[2025-10-05 22:51:51] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:51] [INFO]   0000  53 45 54 5F 43 48 20 32 20 4F 46 46 0D 0A         |SET_CH 2 OFF..|
[2025-10-05 22:51:51] [INFO] [SERIAL TX] Wrote 14 bytes to port
[2025-10-05 22:51:51] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:51] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:51] [INFO] [SERIAL RX] Chunk #1: received 81 bytes (elapsed: 0.194s, total: 81 bytes)
[2025-10-05 22:51:52] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:52] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:52] [INFO] [SERIAL RX]   Total bytes: 81
[2025-10-05 22:51:52] [INFO] [SERIAL RX]   Chunks received: 1
[2025-10-05 22:51:52] [INFO] [SERIAL RX]   Total time: 0.695s
[2025-10-05 22:51:52] [INFO] [SERIAL RX] Decoded text (81 characters):
[2025-10-05 22:51:52] [INFO]   	[ECHO] Received CMD: "SET_CH 2 OFF"\r\n
  	[ECHO] OK: Channel 2 set OFF (no change)\r\n
  
[2025-10-05 22:51:52] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:52] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 32 20   | CMD: "SET_CH 2 |
  0020  4F 46 46 22 0D 0A 09 5B 45 43 48 4F 5D 20 4F 4B   |OFF"...[ECHO] OK|
  0030  3A 20 43 68 61 6E 6E 65 6C 20 32 20 73 65 74 20   |: Channel 2 set |
  0040  4F 46 46 20 28 6E 6F 20 63 68 61 6E 67 65 29 0D   |OFF (no change).|
  0050  0A                                                |.|
[2025-10-05 22:51:52] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:52] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:52] [PASS] STEP 2.2 completed successfully

STEP 2.3 Set CH3 to ON

PASS

Started	Finished
2025-10-05 22:51:52	2025-10-05 22:51:53

Log

[2025-10-05 22:51:52] [STEP 2.3] Set CH3 to ON
[2025-10-05 22:51:52] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:52] [INFO] [SERIAL]   port=COM11, command='SET_CH 3 ON', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:52] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:52] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:52] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:52] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:52] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:52] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:52] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:52] [INFO] [SERIAL TX] Sending command: 'SET_CH 3 ON'
[2025-10-05 22:51:52] [INFO] [SERIAL TX] Payload length: 13 bytes (including CR+LF)
[2025-10-05 22:51:52] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:52] [INFO]   0000  53 45 54 5F 43 48 20 33 20 4F 4E 0D 0A            |SET_CH 3 ON..|
[2025-10-05 22:51:52] [INFO] [SERIAL TX] Wrote 13 bytes to port
[2025-10-05 22:51:52] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:52] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:52] [INFO] [SERIAL RX] Chunk #1: received 111 bytes (elapsed: 0.204s, total: 111 bytes)
[2025-10-05 22:51:52] [INFO] [SERIAL RX] Chunk #2: received 30 bytes (elapsed: 0.215s, total: 141 bytes)
[2025-10-05 22:51:53] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:53] [INFO] [SERIAL RX]   Total bytes: 141
[2025-10-05 22:51:53] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:51:53] [INFO] [SERIAL RX]   Total time: 0.724s
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Decoded text (141 characters):
[2025-10-05 22:51:53] [INFO]   	[ECHO] Received CMD: "SET_CH 3 ON"\r\n
  [INFO] SET_RELAY[2] t=12209946 us tag=<UART Command Handler> pin=2 val=1\r\n
  	[ECHO] OK: Channel 3 set ON\r\n
  
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:53] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 33 20   | CMD: "SET_CH 3 |
  0020  4F 4E 22 0D 0A 5B 49 4E 46 4F 5D 20 53 45 54 5F   |ON"..[INFO] SET_|
  0030  52 45 4C 41 59 5B 32 5D 20 74 3D 31 32 32 30 39   |RELAY[2] t=12209|
  0040  39 34 36 20 75 73 20 74 61 67 3D 3C 55 41 52 54   |946 us tag=<UART|
  0050  20 43 6F 6D 6D 61 6E 64 20 48 61 6E 64 6C 65 72   | Command Handler|
  0060  3E 20 70 69 6E 3D 32 20 76 61 6C 3D 31 0D 0A 09   |> pin=2 val=1...|
  0070  5B 45 43 48 4F 5D 20 4F 4B 3A 20 43 68 61 6E 6E   |[ECHO] OK: Chann|
  0080  65 6C 20 33 20 73 65 74 20 4F 4E 0D 0A            |el 3 set ON..|
[2025-10-05 22:51:53] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:53] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:53] [PASS] STEP 2.3 completed successfully

STEP 2.4 Set CH4 to OFF

PASS

Started	Finished
2025-10-05 22:51:53	2025-10-05 22:51:53

Log

[2025-10-05 22:51:53] [STEP 2.4] Set CH4 to OFF
[2025-10-05 22:51:53] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:53] [INFO] [SERIAL]   port=COM11, command='SET_CH 4 OFF', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:53] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:53] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:53] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:53] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:53] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:53] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:53] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:53] [INFO] [SERIAL TX] Sending command: 'SET_CH 4 OFF'
[2025-10-05 22:51:53] [INFO] [SERIAL TX] Payload length: 14 bytes (including CR+LF)
[2025-10-05 22:51:53] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:53] [INFO]   0000  53 45 54 5F 43 48 20 34 20 4F 46 46 0D 0A         |SET_CH 4 OFF..|
[2025-10-05 22:51:53] [INFO] [SERIAL TX] Wrote 14 bytes to port
[2025-10-05 22:51:53] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Chunk #1: received 81 bytes (elapsed: 0.194s, total: 81 bytes)
[2025-10-05 22:51:53] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:53] [INFO] [SERIAL RX]   Total bytes: 81
[2025-10-05 22:51:53] [INFO] [SERIAL RX]   Chunks received: 1
[2025-10-05 22:51:53] [INFO] [SERIAL RX]   Total time: 0.694s
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Decoded text (81 characters):
[2025-10-05 22:51:53] [INFO]   	[ECHO] Received CMD: "SET_CH 4 OFF"\r\n
  	[ECHO] OK: Channel 4 set OFF (no change)\r\n
  
[2025-10-05 22:51:53] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:53] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 34 20   | CMD: "SET_CH 4 |
  0020  4F 46 46 22 0D 0A 09 5B 45 43 48 4F 5D 20 4F 4B   |OFF"...[ECHO] OK|
  0030  3A 20 43 68 61 6E 6E 65 6C 20 34 20 73 65 74 20   |: Channel 4 set |
  0040  4F 46 46 20 28 6E 6F 20 63 68 61 6E 67 65 29 0D   |OFF (no change).|
  0050  0A                                                |.|
[2025-10-05 22:51:53] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:53] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:53] [PASS] STEP 2.4 completed successfully

STEP 2.5 Set CH5 to ON

PASS

Started	Finished
2025-10-05 22:51:53	2025-10-05 22:51:54

Log

[2025-10-05 22:51:53] [STEP 2.5] Set CH5 to ON
[2025-10-05 22:51:53] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:53] [INFO] [SERIAL]   port=COM11, command='SET_CH 5 ON', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:53] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:53] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:53] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:53] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:53] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:54] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:54] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Sending command: 'SET_CH 5 ON'
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Payload length: 13 bytes (including CR+LF)
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:54] [INFO]   0000  53 45 54 5F 43 48 20 35 20 4F 4E 0D 0A            |SET_CH 5 ON..|
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Wrote 13 bytes to port
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:54] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:54] [INFO] [SERIAL RX] Chunk #1: received 111 bytes (elapsed: 0.204s, total: 111 bytes)
[2025-10-05 22:51:54] [INFO] [SERIAL RX] Chunk #2: received 30 bytes (elapsed: 0.215s, total: 141 bytes)
[2025-10-05 22:51:54] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:54] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:54] [INFO] [SERIAL RX]   Total bytes: 141
[2025-10-05 22:51:54] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:51:54] [INFO] [SERIAL RX]   Total time: 0.717s
[2025-10-05 22:51:54] [INFO] [SERIAL RX] Decoded text (141 characters):
[2025-10-05 22:51:54] [INFO]   	[ECHO] Received CMD: "SET_CH 5 ON"\r\n
  [INFO] SET_RELAY[3] t=13935473 us tag=<UART Command Handler> pin=4 val=1\r\n
  	[ECHO] OK: Channel 5 set ON\r\n
  
[2025-10-05 22:51:54] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:54] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 35 20   | CMD: "SET_CH 5 |
  0020  4F 4E 22 0D 0A 5B 49 4E 46 4F 5D 20 53 45 54 5F   |ON"..[INFO] SET_|
  0030  52 45 4C 41 59 5B 33 5D 20 74 3D 31 33 39 33 35   |RELAY[3] t=13935|
  0040  34 37 33 20 75 73 20 74 61 67 3D 3C 55 41 52 54   |473 us tag=<UART|
  0050  20 43 6F 6D 6D 61 6E 64 20 48 61 6E 64 6C 65 72   | Command Handler|
  0060  3E 20 70 69 6E 3D 34 20 76 61 6C 3D 31 0D 0A 09   |> pin=4 val=1...|
  0070  5B 45 43 48 4F 5D 20 4F 4B 3A 20 43 68 61 6E 6E   |[ECHO] OK: Chann|
  0080  65 6C 20 35 20 73 65 74 20 4F 4E 0D 0A            |el 5 set ON..|
[2025-10-05 22:51:54] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:54] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:54] [PASS] STEP 2.5 completed successfully

STEP 2.6 Set CH6 to OFF

PASS

Started	Finished
2025-10-05 22:51:54	2025-10-05 22:51:55

Log

[2025-10-05 22:51:54] [STEP 2.6] Set CH6 to OFF
[2025-10-05 22:51:54] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:54] [INFO] [SERIAL]   port=COM11, command='SET_CH 6 OFF', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:54] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:54] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:54] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:54] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:54] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:54] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:54] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Sending command: 'SET_CH 6 OFF'
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Payload length: 14 bytes (including CR+LF)
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:54] [INFO]   0000  53 45 54 5F 43 48 20 36 20 4F 46 46 0D 0A         |SET_CH 6 OFF..|
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Wrote 14 bytes to port
[2025-10-05 22:51:54] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:54] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:55] [INFO] [SERIAL RX] Chunk #1: received 81 bytes (elapsed: 0.206s, total: 81 bytes)
[2025-10-05 22:51:55] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:55] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:55] [INFO] [SERIAL RX]   Total bytes: 81
[2025-10-05 22:51:55] [INFO] [SERIAL RX]   Chunks received: 1
[2025-10-05 22:51:55] [INFO] [SERIAL RX]   Total time: 0.716s
[2025-10-05 22:51:55] [INFO] [SERIAL RX] Decoded text (81 characters):
[2025-10-05 22:51:55] [INFO]   	[ECHO] Received CMD: "SET_CH 6 OFF"\r\n
  	[ECHO] OK: Channel 6 set OFF (no change)\r\n
  
[2025-10-05 22:51:55] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:55] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 36 20   | CMD: "SET_CH 6 |
  0020  4F 46 46 22 0D 0A 09 5B 45 43 48 4F 5D 20 4F 4B   |OFF"...[ECHO] OK|
  0030  3A 20 43 68 61 6E 6E 65 6C 20 36 20 73 65 74 20   |: Channel 6 set |
  0040  4F 46 46 20 28 6E 6F 20 63 68 61 6E 67 65 29 0D   |OFF (no change).|
  0050  0A                                                |.|
[2025-10-05 22:51:55] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:55] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:55] [PASS] STEP 2.6 completed successfully

STEP 2.7 Set CH7 to ON

PASS

Started	Finished
2025-10-05 22:51:55	2025-10-05 22:51:56

Log

[2025-10-05 22:51:55] [STEP 2.7] Set CH7 to ON
[2025-10-05 22:51:55] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:55] [INFO] [SERIAL]   port=COM11, command='SET_CH 7 ON', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:55] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:55] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:55] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:55] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:55] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:55] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:55] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:55] [INFO] [SERIAL TX] Sending command: 'SET_CH 7 ON'
[2025-10-05 22:51:55] [INFO] [SERIAL TX] Payload length: 13 bytes (including CR+LF)
[2025-10-05 22:51:55] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:55] [INFO]   0000  53 45 54 5F 43 48 20 37 20 4F 4E 0D 0A            |SET_CH 7 ON..|
[2025-10-05 22:51:55] [INFO] [SERIAL TX] Wrote 13 bytes to port
[2025-10-05 22:51:55] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:55] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:56] [INFO] [SERIAL RX] Chunk #1: received 141 bytes (elapsed: 0.195s, total: 141 bytes)
[2025-10-05 22:51:56] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:56] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:56] [INFO] [SERIAL RX]   Total bytes: 141
[2025-10-05 22:51:56] [INFO] [SERIAL RX]   Chunks received: 1
[2025-10-05 22:51:56] [INFO] [SERIAL RX]   Total time: 0.703s
[2025-10-05 22:51:56] [INFO] [SERIAL RX] Decoded text (141 characters):
[2025-10-05 22:51:56] [INFO]   	[ECHO] Received CMD: "SET_CH 7 ON"\r\n
  [INFO] SET_RELAY[4] t=15660944 us tag=<UART Command Handler> pin=6 val=1\r\n
  	[ECHO] OK: Channel 7 set ON\r\n
  
[2025-10-05 22:51:56] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:56] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 37 20   | CMD: "SET_CH 7 |
  0020  4F 4E 22 0D 0A 5B 49 4E 46 4F 5D 20 53 45 54 5F   |ON"..[INFO] SET_|
  0030  52 45 4C 41 59 5B 34 5D 20 74 3D 31 35 36 36 30   |RELAY[4] t=15660|
  0040  39 34 34 20 75 73 20 74 61 67 3D 3C 55 41 52 54   |944 us tag=<UART|
  0050  20 43 6F 6D 6D 61 6E 64 20 48 61 6E 64 6C 65 72   | Command Handler|
  0060  3E 20 70 69 6E 3D 36 20 76 61 6C 3D 31 0D 0A 09   |> pin=6 val=1...|
  0070  5B 45 43 48 4F 5D 20 4F 4B 3A 20 43 68 61 6E 6E   |[ECHO] OK: Chann|
  0080  65 6C 20 37 20 73 65 74 20 4F 4E 0D 0A            |el 7 set ON..|
[2025-10-05 22:51:56] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:56] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:56] [PASS] STEP 2.7 completed successfully

STEP 2.8 Set CH8 to OFF

PASS

Started	Finished
2025-10-05 22:51:56	2025-10-05 22:51:57

Log

[2025-10-05 22:51:56] [STEP 2.8] Set CH8 to OFF
[2025-10-05 22:51:56] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:56] [INFO] [SERIAL]   port=COM11, command='SET_CH 8 OFF', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:56] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:56] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:56] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:56] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:56] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:56] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:56] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:56] [INFO] [SERIAL TX] Sending command: 'SET_CH 8 OFF'
[2025-10-05 22:51:56] [INFO] [SERIAL TX] Payload length: 14 bytes (including CR+LF)
[2025-10-05 22:51:56] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:56] [INFO]   0000  53 45 54 5F 43 48 20 38 20 4F 46 46 0D 0A         |SET_CH 8 OFF..|
[2025-10-05 22:51:56] [INFO] [SERIAL TX] Wrote 14 bytes to port
[2025-10-05 22:51:56] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:56] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:56] [INFO] [SERIAL RX] Chunk #1: received 81 bytes (elapsed: 0.204s, total: 81 bytes)
[2025-10-05 22:51:57] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:51:57] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:51:57] [INFO] [SERIAL RX]   Total bytes: 81
[2025-10-05 22:51:57] [INFO] [SERIAL RX]   Chunks received: 1
[2025-10-05 22:51:57] [INFO] [SERIAL RX]   Total time: 0.714s
[2025-10-05 22:51:57] [INFO] [SERIAL RX] Decoded text (81 characters):
[2025-10-05 22:51:57] [INFO]   	[ECHO] Received CMD: "SET_CH 8 OFF"\r\n
  	[ECHO] OK: Channel 8 set OFF (no change)\r\n
  
[2025-10-05 22:51:57] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:51:57] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 53 45 54 5F 43 48 20 38 20   | CMD: "SET_CH 8 |
  0020  4F 46 46 22 0D 0A 09 5B 45 43 48 4F 5D 20 4F 4B   |OFF"...[ECHO] OK|
  0030  3A 20 43 68 61 6E 6E 65 6C 20 38 20 73 65 74 20   |: Channel 8 set |
  0040  4F 46 46 20 28 6E 6F 20 63 68 61 6E 67 65 29 0D   |OFF (no change).|
  0050  0A                                                |.|
[2025-10-05 22:51:57] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:57] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:57] [PASS] STEP 2.8 completed successfully

STEP 2.9 Verify CH1 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.9] Verify CH1 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=1, expected_state=ON
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.1.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.1.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.1.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.1.0 = INTEGER: 1

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '1'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.1.0 -> '1' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 1
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: ON
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 1 state verified: ON
[2025-10-05 22:51:57] [PASS] STEP 2.9 completed successfully

STEP 2.10 Verify CH2 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.10] Verify CH2 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=2, expected_state=OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.2.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.2.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.2.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.2.0 = INTEGER: 0

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.2.0 -> '0' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 2 state verified: OFF
[2025-10-05 22:51:57] [PASS] STEP 2.10 completed successfully

STEP 2.11 Verify CH3 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.11] Verify CH3 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=3, expected_state=ON
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.3.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.3.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.3.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.3.0 = INTEGER: 1

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '1'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.3.0 -> '1' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 1
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: ON
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 3 state verified: ON
[2025-10-05 22:51:57] [PASS] STEP 2.11 completed successfully

STEP 2.12 Verify CH4 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.12] Verify CH4 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=4, expected_state=OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.4.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.4.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.4.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.4.0 = INTEGER: 0

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.4.0 -> '0' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 4 state verified: OFF
[2025-10-05 22:51:57] [PASS] STEP 2.12 completed successfully

STEP 2.13 Verify CH5 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.13] Verify CH5 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=5, expected_state=ON
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.5.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.5.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.5.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.5.0 = INTEGER: 1

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '1'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.5.0 -> '1' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 1
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: ON
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 5 state verified: ON
[2025-10-05 22:51:57] [PASS] STEP 2.13 completed successfully

STEP 2.14 Verify CH6 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.14] Verify CH6 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=6, expected_state=OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.6.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.6.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.6.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.6.0 = INTEGER: 0

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.6.0 -> '0' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 6 state verified: OFF
[2025-10-05 22:51:57] [PASS] STEP 2.14 completed successfully

STEP 2.15 Verify CH7 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.15] Verify CH7 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=7, expected_state=ON
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.7.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.7.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.7.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.7.0 = INTEGER: 1

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '1'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.7.0 -> '1' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 1
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: ON
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 7 state verified: ON
[2025-10-05 22:51:57] [PASS] STEP 2.15 completed successfully

STEP 2.16 Verify CH8 state via SNMP

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:51:57

Log

[2025-10-05 22:51:57] [STEP 2.16] Verify CH8 state via SNMP
[2025-10-05 22:51:57] [INFO] [SNMP] Executing get_outlet: channel=8, expected_state=OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.8.0
[2025-10-05 22:51:57] [INFO] [SNMP] get_value() called
[2025-10-05 22:51:57] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.8.0, Community: public, Timeout: 3.0s
[2025-10-05 22:51:57] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.8.0
[2025-10-05 22:51:57] [INFO] [SNMP] rc=0
[2025-10-05 22:51:57] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.8.0 = INTEGER: 0

[2025-10-05 22:51:57] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:51:57] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:51:57] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.8.0 -> '0' (v1/public)
[2025-10-05 22:51:57] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:51:57] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:51:57] [INFO] [SNMP] Channel 8 state verified: OFF
[2025-10-05 22:51:57] [PASS] STEP 2.16 completed successfully

STEP 3 Reboot and verify network config persistence

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:52:07

Substeps

STEP 3.1 Reboot device

PASS

Started	Finished
2025-10-05 22:51:57	2025-10-05 22:52:06

Log

[2025-10-05 22:51:57] [STEP 3.1] Reboot device
[2025-10-05 22:51:57] [INFO] [SERIAL] send_command() called
[2025-10-05 22:51:57] [INFO] [SERIAL]   port=COM11, command='REBOOT', baudrate=115200, timeout=2.0s
[2025-10-05 22:51:57] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:51:57] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:51:57] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:51:57] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:51:57] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:51:57] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:51:57] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:51:57] [INFO] [SERIAL TX] Sending command: 'REBOOT'
[2025-10-05 22:51:57] [INFO] [SERIAL TX] Payload length: 8 bytes (including CR+LF)
[2025-10-05 22:51:57] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:51:57] [INFO]   0000  52 45 42 4F 4F 54 0D 0A                           |REBOOT..|
[2025-10-05 22:51:57] [INFO] [SERIAL TX] Wrote 8 bytes to port
[2025-10-05 22:51:57] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:51:57] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:51:58] [INFO] [SERIAL RX] Chunk #1: received 32 bytes (elapsed: 0.356s, total: 32 bytes)
[2025-10-05 22:51:58] [ERROR] [SERIAL ERROR] Exception during send_command:
[2025-10-05 22:51:58] [ERROR] [SERIAL ERROR]   Type: SerialException
[2025-10-05 22:51:58] [ERROR] [SERIAL ERROR]   Message: ClearCommError failed (PermissionError(13, 'The device does not recognize the command.', None, 22))
[2025-10-05 22:51:58] [ERROR] [SERIAL ERROR]   Port: COM11, Command: 'REBOOT'
[2025-10-05 22:51:58] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:51:58] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:51:58] [INFO] [SERIAL] wait_for_reboot_and_ready() called
[2025-10-05 22:51:58] [INFO] [SERIAL]   port=COM11, ready_token='SYSTEM READY', baudrate=115200, timeout=15.0s
[2025-10-05 22:51:58] [INFO] [SERIAL] Waiting 200ms for device to start rebooting...
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #1 (remaining timeout: 14.8s)
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #1 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:58] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #2 (remaining timeout: 14.6s)
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #2 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:58] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #3 (remaining timeout: 14.4s)
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #3 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:58] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #4 (remaining timeout: 14.2s)
[2025-10-05 22:51:58] [INFO] [SERIAL] Connection attempt #4 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:58] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:59] [INFO] [SERIAL] Connection attempt #5 (remaining timeout: 14.0s)
[2025-10-05 22:51:59] [INFO] [SERIAL] Connection attempt #5 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:59] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:59] [INFO] [SERIAL] Connection attempt #6 (remaining timeout: 13.8s)
[2025-10-05 22:51:59] [INFO] [SERIAL] Connection attempt #6 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:51:59] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:51:59] [INFO] [SERIAL] Connection attempt #7 (remaining timeout: 13.6s)
[2025-10-05 22:51:59] [INFO] [SERIAL] Connected to port COM11 on attempt #7
[2025-10-05 22:51:59] [INFO] [SERIAL RX] Monitoring for ready token: 'SYSTEM READY'
[2025-10-05 22:52:02] [INFO] [SERIAL RX] Chunk #1: 393 bytes
[2025-10-05 22:52:02] [INFO] [SERIAL RX] Content: [INFO] Core 0 initializing...<CR><LF>
	[ECHO] Device Serial : SN-369366060325<CR><LF>
	[ECHO] Firmware Ver  : 1.0.0<CR><LF>
	[ECHO] Core voltage  : 1.15 V (vsel = 1)<CR><LF>
	[ECHO] Clock Sources :<CR><LF>
	[ECHO] 	SYS: 200000000 Hz (200 MHz)<CR><LF>
	[ECHO] 	USB: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	PER: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	ADC: 48000000 Hz (48 MHz)<CR><LF>
[INFO] ADC initializing<CR><LF>
VREG register: 0x000010D1<CR><LF>
[INFO] I2C scanning...<CR><LF>

[2025-10-05 22:52:02] [INFO] [SERIAL RX] Chunk #2: 64 bytes
[2025-10-05 22:52:02] [INFO] [SERIAL RX] Content: [INFO] EEPROM initializing...<CR><LF>
[INFO] MCP23017 initializing...<CR><LF>

[2025-10-05 22:52:04] [INFO] [SERIAL RX] Chunk #3: 162 bytes
[2025-10-05 22:52:04] [INFO] [SERIAL RX] Content: [INFO] Headless mode, skipping display initialization<CR><LF>
[INFO] Initializing HLW8032...<CR><LF>
[INFO] Initializing buttons...<CR><LF>
[INFO] Loaded network config from EEPROM.<CR><LF>

[2025-10-05 22:52:06] [INFO] [SERIAL RX] Chunk #4: 456 bytes
[2025-10-05 22:52:06] [INFO] [SERIAL RX] Content: [INFO] W5500 version: 0x04<CR><LF>
[INFO] W5500 PHY link is up<CR><LF>
	[ECHO] =============================================<CR><LF>
	[ECHO]  W5500 network configuration : static<CR><LF>
	[ECHO]  MAC         : 00:08:DC:BE:EF:91<CR><LF>
	[ECHO]  IP          : 192.168.0.12<CR><LF>
	[ECHO]  Subnet Mask : 255.255.255.0<CR><LF>
	[ECHO]  Gateway     : 192.168.1.1<CR><LF>
	[ECHO]  DNS         : 1.1.1.1<CR><LF>
	[ECHO] =============================================<CR><LF>
<CR><LF>
SYSTEM READY<CR><LF>
[INFO] - SNMP : Start SNMP Agent Daemon<CR><LF>

[2025-10-05 22:52:06] [INFO] [SERIAL] Ready token 'SYSTEM READY' detected!
[2025-10-05 22:52:06] [INFO] [SERIAL RX] Total response: 1075 bytes in 4 chunks
[2025-10-05 22:52:06] [INFO] [SERIAL RX] Elapsed time: 8.304s
[2025-10-05 22:52:06] [INFO] [SERIAL RX] Full response:
[2025-10-05 22:52:06] [INFO] [INFO] Core 0 initializing...\r\n
	[ECHO] Device Serial : SN-369366060325\r\n
	[ECHO] Firmware Ver  : 1.0.0\r\n
	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
	[ECHO] Clock Sources :\r\n
	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
[INFO] ADC initializing\r\n
VREG register: 0x000010D1\r\n
[INFO] I2C scanning...\r\n
[INFO] EEPROM initializing...\r\n
[INFO] MCP23017 initializing...\r\n
[INFO] Headless mode, skipping display initialization\r\n
[INFO] Initializing HLW8032...\r\n
[INFO] Initializing buttons...\r\n
[INFO] Loaded network config from EEPROM.\r\n
[INFO] W5500 version: 0x04\r\n
[INFO] W5500 PHY link is up\r\n
	[ECHO] =============================================\r\n
	[ECHO]  W5500 network configuration : static\r\n
	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
	[ECHO]  IP          : 192.168.0.12\r\n
	[ECHO]  Subnet Mask : 255.255.255.0\r\n
	[ECHO]  Gateway     : 192.168.1.1\r\n
	[ECHO]  DNS         : 1.1.1.1\r\n
	[ECHO] =============================================\r\n
\r\n
SYSTEM READY\r\n
[INFO] - SNMP : Start SNMP Agent Daemon\r\n

[2025-10-05 22:52:06] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:06] [INFO]   0000  5B 49 4E 46 4F 5D 20 43 6F 72 65 20 30 20 69 6E   |[INFO] Core 0 in|
  0010  69 74 69 61 6C 69 7A 69 6E 67 2E 2E 2E 0D 0A 09   |itializing......|
  0020  5B 45 43 48 4F 5D 20 44 65 76 69 63 65 20 53 65   |[ECHO] Device Se|
  0030  72 69 61 6C 20 3A 20 53 4E 2D 33 36 39 33 36 36   |rial : SN-369366|
  0040  30 36 30 33 32 35 0D 0A 09 5B 45 43 48 4F 5D 20   |060325...[ECHO] |
  0050  46 69 72 6D 77 61 72 65 20 56 65 72 20 20 3A 20   |Firmware Ver  : |
  0060  31 2E 30 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 43   |1.0.0...[ECHO] C|
  0070  6F 72 65 20 76 6F 6C 74 61 67 65 20 20 3A 20 31   |ore voltage  : 1|
  0080  2E 31 35 20 56 20 28 76 73 65 6C 20 3D 20 31 29   |.15 V (vsel = 1)|
  0090  0D 0A 09 5B 45 43 48 4F 5D 20 43 6C 6F 63 6B 20   |...[ECHO] Clock |
  00A0  53 6F 75 72 63 65 73 20 3A 0D 0A 09 5B 45 43 48   |Sources :...[ECH|
  00B0  4F 5D 20 09 53 59 53 3A 20 32 30 30 30 30 30 30   |O] .SYS: 2000000|
  00C0  30 30 20 48 7A 20 28 32 30 30 20 4D 48 7A 29 0D   |00 Hz (200 MHz).|
  00D0  0A 09 5B 45 43 48 4F 5D 20 09 55 53 42 3A 20 34   |..[ECHO] .USB: 4|
  00E0  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  00F0  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 50 45   |Hz)...[ECHO] .PE|
  0100  52 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |R: 48000000 Hz (|
  0110  34 38 20 4D 48 7A 29 0D 0A 09 5B 45 43 48 4F 5D   |48 MHz)...[ECHO]|
  0120  20 09 41 44 43 3A 20 34 38 30 30 30 30 30 30 20   | .ADC: 48000000 |
  0130  48 7A 20 28 34 38 20 4D 48 7A 29 0D 0A 5B 49 4E   |Hz (48 MHz)..[IN|
  0140  46 4F 5D 20 41 44 43 20 69 6E 69 74 69 61 6C 69   |FO] ADC initiali|
  0150  7A 69 6E 67 0D 0A 56 52 45 47 20 72 65 67 69 73   |zing..VREG regis|
  0160  74 65 72 3A 20 30 78 30 30 30 30 31 30 44 31 0D   |ter: 0x000010D1.|
  0170  0A 5B 49 4E 46 4F 5D 20 49 32 43 20 73 63 61 6E   |.[INFO] I2C scan|
  0180  6E 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |ning.....[INFO] |
  0190  45 45 50 52 4F 4D 20 69 6E 69 74 69 61 6C 69 7A   |EEPROM initializ|
  01A0  69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20 4D   |ing.....[INFO] M|
  01B0  43 50 32 33 30 31 37 20 69 6E 69 74 69 61 6C 69   |CP23017 initiali|
  01C0  7A 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |zing.....[INFO] |
  01D0  48 65 61 64 6C 65 73 73 20 6D 6F 64 65 2C 20 73   |Headless mode, s|
  01E0  6B 69 70 70 69 6E 67 20 64 69 73 70 6C 61 79 20   |kipping display |
  01F0  69 6E 69 74 69 61 6C 69 7A 61 74 69 6F 6E 0D 0A   |initialization..|
  0200  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0210  69 6E 67 20 48 4C 57 38 30 33 32 2E 2E 2E 0D 0A   |ing HLW8032.....|
  0220  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0230  69 6E 67 20 62 75 74 74 6F 6E 73 2E 2E 2E 0D 0A   |ing buttons.....|
  0240  5B 49 4E 46 4F 5D 20 4C 6F 61 64 65 64 20 6E 65   |[INFO] Loaded ne|
  0250  74 77 6F 72 6B 20 63 6F 6E 66 69 67 20 66 72 6F   |twork config fro|
  0260  6D 20 45 45 50 52 4F 4D 2E 0D 0A 5B 49 4E 46 4F   |m EEPROM...[INFO|
  0270  5D 20 57 35 35 30 30 20 76 65 72 73 69 6F 6E 3A   |] W5500 version:|
  0280  20 30 78 30 34 0D 0A 5B 49 4E 46 4F 5D 20 57 35   | 0x04..[INFO] W5|
  0290  35 30 30 20 50 48 59 20 6C 69 6E 6B 20 69 73 20   |500 PHY link is |
  02A0  75 70 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D   |up...[ECHO] ====|
  02B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 09 5B 45 43 48   |=========...[ECH|
  02E0  4F 5D 20 20 57 35 35 30 30 20 6E 65 74 77 6F 72   |O]  W5500 networ|
  02F0  6B 20 63 6F 6E 66 69 67 75 72 61 74 69 6F 6E 20   |k configuration |
  0300  3A 20 73 74 61 74 69 63 0D 0A 09 5B 45 43 48 4F   |: static...[ECHO|
  0310  5D 20 20 4D 41 43 20 20 20 20 20 20 20 20 20 3A   |]  MAC         :|
  0320  20 30 30 3A 30 38 3A 44 43 3A 42 45 3A 45 46 3A   | 00:08:DC:BE:EF:|
  0330  39 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 49 50 20   |91...[ECHO]  IP |
  0340  20 20 20 20 20 20 20 20 20 3A 20 31 39 32 2E 31   |         : 192.1|
  0350  36 38 2E 30 2E 31 32 0D 0A 09 5B 45 43 48 4F 5D   |68.0.12...[ECHO]|
  0360  20 20 53 75 62 6E 65 74 20 4D 61 73 6B 20 3A 20   |  Subnet Mask : |
  0370  32 35 35 2E 32 35 35 2E 32 35 35 2E 30 0D 0A 09   |255.255.255.0...|
  0380  5B 45 43 48 4F 5D 20 20 47 61 74 65 77 61 79 20   |[ECHO]  Gateway |
  0390  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 31 2E   |    : 192.168.1.|
  03A0  31 0D 0A 09 5B 45 43 48 4F 5D 20 20 44 4E 53 20   |1...[ECHO]  DNS |
  03B0  20 20 20 20 20 20 20 20 3A 20 31 2E 31 2E 31 2E   |        : 1.1.1.|
  03C0  31 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D   |1...[ECHO] =====|
  03D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03F0  3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 0D 0A 53 59 53 54   |========....SYST|
  0400  45 4D 20 52 45 41 44 59 0D 0A 5B 49 4E 46 4F 5D   |EM READY..[INFO]|
  0410  20 2D 20 53 4E 4D 50 20 3A 20 53 74 61 72 74 20   | - SNMP : Start |
  0420  53 4E 4D 50 20 41 67 65 6E 74 20 44 61 65 6D 6F   |SNMP Agent Daemo|
  0430  6E 0D 0A                                          |n..|
[2025-10-05 22:52:06] [INFO] [SERIAL] Device ready! Returning True
[2025-10-05 22:52:06] [INFO] [SERIAL] Closed port COM11
[2025-10-05 22:52:06] [PASS] STEP 3.1 completed successfully

STEP 3.2 Get network config after reboot

PASS

Started	Finished
2025-10-05 22:52:06	2025-10-05 22:52:07

Log

[2025-10-05 22:52:06] [STEP 3.2] Get network config after reboot
[2025-10-05 22:52:06] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:06] [INFO] [SERIAL]   port=COM11, command='NETINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:06] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:06] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:06] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:06] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:06] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:06] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:06] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:06] [INFO] [SERIAL TX] Sending command: 'NETINFO'
[2025-10-05 22:52:06] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:52:06] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:06] [INFO]   0000  4E 45 54 49 4E 46 4F 0D 0A                        |NETINFO..|
[2025-10-05 22:52:06] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:52:06] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:06] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:06] [INFO] [SERIAL RX] Chunk #1: received 93 bytes (elapsed: 0.021s, total: 93 bytes)
[2025-10-05 22:52:06] [INFO] [SERIAL RX] Chunk #2: received 407 bytes (elapsed: 0.340s, total: 500 bytes)
[2025-10-05 22:52:07] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:52:07] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:52:07] [INFO] [SERIAL RX]   Total bytes: 500
[2025-10-05 22:52:07] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:52:07] [INFO] [SERIAL RX]   Total time: 0.845s
[2025-10-05 22:52:07] [INFO] [SERIAL RX] Decoded text (500 characters):
[2025-10-05 22:52:07] [INFO]   [INFO] HTTP server listening on port 80\r\n
  [INFO] - [1] UDP Socket for SNMP Agent, port [161]\r\n
  	[ECHO] Received CMD: "NETINFO"\r\n
  	[ECHO] NETWORK INFORMATION:\r\n
  	[ECHO] =============================================\r\n
  	[ECHO]  W5500 network configuration : static\r\n
  	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
  	[ECHO]  IP          : 192.168.0.12\r\n
  	[ECHO]  Subnet Mask : 255.255.255.0\r\n
  	[ECHO]  Gateway     : 192.168.1.1\r\n
  	[ECHO]  DNS         : 1.1.1.1\r\n
  	[ECHO] =============================================\r\n
  \r\n
  
[2025-10-05 22:52:07] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:07] [INFO]   0000  5B 49 4E 46 4F 5D 20 48 54 54 50 20 73 65 72 76   |[INFO] HTTP serv|
  0010  65 72 20 6C 69 73 74 65 6E 69 6E 67 20 6F 6E 20   |er listening on |
  0020  70 6F 72 74 20 38 30 0D 0A 5B 49 4E 46 4F 5D 20   |port 80..[INFO] |
  0030  2D 20 5B 31 5D 20 55 44 50 20 53 6F 63 6B 65 74   |- [1] UDP Socket|
  0040  20 66 6F 72 20 53 4E 4D 50 20 41 67 65 6E 74 2C   | for SNMP Agent,|
  0050  20 70 6F 72 74 20 5B 31 36 31 5D 0D 0A 09 5B 45   | port [161]...[E|
  0060  43 48 4F 5D 20 52 65 63 65 69 76 65 64 20 43 4D   |CHO] Received CM|
  0070  44 3A 20 22 4E 45 54 49 4E 46 4F 22 0D 0A 09 5B   |D: "NETINFO"...[|
  0080  45 43 48 4F 5D 20 4E 45 54 57 4F 52 4B 20 49 4E   |ECHO] NETWORK IN|
  0090  46 4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09 5B 45 43   |FORMATION:...[EC|
  00A0  48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |HO] ============|
  00B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00D0  3D 0D 0A 09 5B 45 43 48 4F 5D 20 20 57 35 35 30   |=...[ECHO]  W550|
  00E0  30 20 6E 65 74 77 6F 72 6B 20 63 6F 6E 66 69 67   |0 network config|
  00F0  75 72 61 74 69 6F 6E 20 3A 20 73 74 61 74 69 63   |uration : static|
  0100  0D 0A 09 5B 45 43 48 4F 5D 20 20 4D 41 43 20 20   |...[ECHO]  MAC  |
  0110  20 20 20 20 20 20 20 3A 20 30 30 3A 30 38 3A 44   |       : 00:08:D|
  0120  43 3A 42 45 3A 45 46 3A 39 31 0D 0A 09 5B 45 43   |C:BE:EF:91...[EC|
  0130  48 4F 5D 20 20 49 50 20 20 20 20 20 20 20 20 20   |HO]  IP         |
  0140  20 3A 20 31 39 32 2E 31 36 38 2E 30 2E 31 32 0D   | : 192.168.0.12.|
  0150  0A 09 5B 45 43 48 4F 5D 20 20 53 75 62 6E 65 74   |..[ECHO]  Subnet|
  0160  20 4D 61 73 6B 20 3A 20 32 35 35 2E 32 35 35 2E   | Mask : 255.255.|
  0170  32 35 35 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 20   |255.0...[ECHO]  |
  0180  47 61 74 65 77 61 79 20 20 20 20 20 3A 20 31 39   |Gateway     : 19|
  0190  32 2E 31 36 38 2E 31 2E 31 0D 0A 09 5B 45 43 48   |2.168.1.1...[ECH|
  01A0  4F 5D 20 20 44 4E 53 20 20 20 20 20 20 20 20 20   |O]  DNS         |
  01B0  3A 20 31 2E 31 2E 31 2E 31 0D 0A 09 5B 45 43 48   |: 1.1.1.1...[ECH|
  01C0  4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |O] =============|
  01D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01F0  0D 0A 0D 0A                                       |....|
[2025-10-05 22:52:07] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:07] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:07] [PASS] STEP 3.2 completed successfully

STEP 3.3 Verify network config persisted

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 3.3] Verify network config persisted
[2025-10-05 22:52:07] [PASS] STEP 3.3 completed successfully

STEP 4 Verify channel states not persisted after reboot

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Substeps

STEP 4.1 [NEGATIVE TEST] MUST FAIL - Verify CH1 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.1] [NEGATIVE TEST] MUST FAIL - Verify CH1 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=1, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.1.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.1.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.1.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.1.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.1.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.1 failed as expected: Channel 1 state mismatch: expected ON, got OFF

STEP 4.2 [NEGATIVE TEST] MUST FAIL - Verify CH2 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.2] [NEGATIVE TEST] MUST FAIL - Verify CH2 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=2, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.2.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.2.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.2.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.2.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.2.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.2 failed as expected: Channel 2 state mismatch: expected ON, got OFF

STEP 4.3 [NEGATIVE TEST] MUST FAIL - Verify CH3 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.3] [NEGATIVE TEST] MUST FAIL - Verify CH3 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=3, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.3.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.3.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.3.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.3.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.3.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.3 failed as expected: Channel 3 state mismatch: expected ON, got OFF

STEP 4.4 [NEGATIVE TEST] MUST FAIL - Verify CH4 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.4] [NEGATIVE TEST] MUST FAIL - Verify CH4 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=4, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.4.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.4.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.4.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.4.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.4.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.4 failed as expected: Channel 4 state mismatch: expected ON, got OFF

STEP 4.5 [NEGATIVE TEST] MUST FAIL - Verify CH5 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.5] [NEGATIVE TEST] MUST FAIL - Verify CH5 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=5, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.5.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.5.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.5.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.5.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.5.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.5 failed as expected: Channel 5 state mismatch: expected ON, got OFF

STEP 4.6 [NEGATIVE TEST] MUST FAIL - Verify CH6 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.6] [NEGATIVE TEST] MUST FAIL - Verify CH6 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=6, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.6.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.6.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.6.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.6.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.6.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.6 failed as expected: Channel 6 state mismatch: expected ON, got OFF

STEP 4.7 [NEGATIVE TEST] MUST FAIL - Verify CH7 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.7] [NEGATIVE TEST] MUST FAIL - Verify CH7 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=7, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.7.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.7.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.7.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.7.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.7.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.7 failed as expected: Channel 7 state mismatch: expected ON, got OFF

STEP 4.8 [NEGATIVE TEST] MUST FAIL - Verify CH8 state via SNMP

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:07

Log

[2025-10-05 22:52:07] [STEP 4.8] [NEGATIVE TEST] MUST FAIL - Verify CH8 state via SNMP
[2025-10-05 22:52:07] [INFO] [SNMP] Executing get_outlet: channel=8, expected_state=ON
[2025-10-05 22:52:07] [INFO] [SNMP] Getting outlet state: OID=1.3.6.1.4.1.19865.2.8.0
[2025-10-05 22:52:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:52:07] [INFO] [SNMP]   Target: 192.168.0.12, OID: 1.3.6.1.4.1.19865.2.8.0, Community: public, Timeout: 3.0s
[2025-10-05 22:52:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.12 1.3.6.1.4.1.19865.2.8.0
[2025-10-05 22:52:07] [INFO] [SNMP] rc=0
[2025-10-05 22:52:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.8.0 = INTEGER: 0

[2025-10-05 22:52:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:52:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:52:07] [INFO] [SNMP GET] 192.168.0.12 1.3.6.1.4.1.19865.2.8.0 -> '0' (v1/public)
[2025-10-05 22:52:07] [INFO] [SNMP] Retrieved value: 0
[2025-10-05 22:52:07] [INFO] [SNMP] Parsed state: OFF
[2025-10-05 22:52:07] [ERROR] [SNMP ERROR] State mismatch: expected=ON, got=OFF
[2025-10-05 22:52:07] [PASS] STEP 4.8 failed as expected: Channel 8 state mismatch: expected ON, got OFF

STEP 5 Factory reset device

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:17

Substeps

STEP 5.1 Perform factory reset (RFS)

PASS

Started	Finished
2025-10-05 22:52:07	2025-10-05 22:52:17

Log

[2025-10-05 22:52:07] [STEP 5.1] Perform factory reset (RFS)
[2025-10-05 22:52:07] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:07] [INFO] [SERIAL]   port=COM11, command='RFS', baudrate=115200, timeout=1.0s
[2025-10-05 22:52:07] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:07] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=1.0s, write_timeout=2.0s
[2025-10-05 22:52:07] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:07] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:07] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:07] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:07] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=1.0s
[2025-10-05 22:52:07] [INFO] [SERIAL TX] Sending command: 'RFS'
[2025-10-05 22:52:07] [INFO] [SERIAL TX] Payload length: 5 bytes (including CR+LF)
[2025-10-05 22:52:07] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:07] [INFO]   0000  52 46 53 0D 0A                                    |RFS..|
[2025-10-05 22:52:07] [INFO] [SERIAL TX] Wrote 5 bytes to port
[2025-10-05 22:52:07] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:07] [INFO] [SERIAL RX] Starting to read response (timeout=1.0s)
[2025-10-05 22:52:08] [INFO] [SERIAL RX] Chunk #1: received 29 bytes (elapsed: 0.371s, total: 29 bytes)
[2025-10-05 22:52:08] [INFO] [SERIAL RX] Chunk #2: received 97 bytes (elapsed: 0.382s, total: 126 bytes)
[2025-10-05 22:52:08] [INFO] [SERIAL RX] Chunk #3: received 50 bytes (elapsed: 0.392s, total: 176 bytes)
[2025-10-05 22:52:08] [INFO] [SERIAL RX] Chunk #4: received 47 bytes (elapsed: 0.403s, total: 223 bytes)
[2025-10-05 22:52:08] [INFO] [SERIAL RX] Chunk #5: received 51 bytes (elapsed: 0.413s, total: 274 bytes)
[2025-10-05 22:52:08] [INFO] [SERIAL RX] Chunk #6: received 39 bytes (elapsed: 0.424s, total: 313 bytes)
[2025-10-05 22:52:08] [ERROR] [SERIAL ERROR] Exception during send_command:
[2025-10-05 22:52:08] [ERROR] [SERIAL ERROR]   Type: SerialException
[2025-10-05 22:52:08] [ERROR] [SERIAL ERROR]   Message: ClearCommError failed (PermissionError(13, 'The device does not recognize the command.', None, 22))
[2025-10-05 22:52:08] [ERROR] [SERIAL ERROR]   Port: COM11, Command: 'RFS'
[2025-10-05 22:52:08] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:08] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:08] [INFO] [SERIAL] wait_for_reboot_and_ready() called
[2025-10-05 22:52:08] [INFO] [SERIAL]   port=COM11, ready_token='SYSTEM READY', baudrate=115200, timeout=10.0s
[2025-10-05 22:52:08] [INFO] [SERIAL] Waiting 200ms for device to start rebooting...
[2025-10-05 22:52:08] [INFO] [SERIAL] Connection attempt #1 (remaining timeout: 9.8s)
[2025-10-05 22:52:08] [INFO] [SERIAL] Connection attempt #1 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:08] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:08] [INFO] [SERIAL] Connection attempt #2 (remaining timeout: 9.6s)
[2025-10-05 22:52:08] [INFO] [SERIAL] Connection attempt #2 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:08] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:08] [INFO] [SERIAL] Connection attempt #3 (remaining timeout: 9.4s)
[2025-10-05 22:52:08] [INFO] [SERIAL] Connection attempt #3 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:08] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:09] [INFO] [SERIAL] Connection attempt #4 (remaining timeout: 9.2s)
[2025-10-05 22:52:09] [INFO] [SERIAL] Connection attempt #4 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:09] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:09] [INFO] [SERIAL] Connection attempt #5 (remaining timeout: 9.0s)
[2025-10-05 22:52:09] [INFO] [SERIAL] Connection attempt #5 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:09] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:09] [INFO] [SERIAL] Connection attempt #6 (remaining timeout: 8.8s)
[2025-10-05 22:52:09] [INFO] [SERIAL] Connection attempt #6 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:09] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:09] [INFO] [SERIAL] Connection attempt #7 (remaining timeout: 8.6s)
[2025-10-05 22:52:09] [INFO] [SERIAL] Connected to port COM11 on attempt #7
[2025-10-05 22:52:09] [INFO] [SERIAL RX] Monitoring for ready token: 'SYSTEM READY'
[2025-10-05 22:52:12] [INFO] [SERIAL RX] Chunk #1: 393 bytes
[2025-10-05 22:52:12] [INFO] [SERIAL RX] Content: [INFO] Core 0 initializing...<CR><LF>
	[ECHO] Device Serial : SN-369366060325<CR><LF>
	[ECHO] Firmware Ver  : 1.0.0<CR><LF>
	[ECHO] Core voltage  : 1.15 V (vsel = 1)<CR><LF>
	[ECHO] Clock Sources :<CR><LF>
	[ECHO] 	SYS: 200000000 Hz (200 MHz)<CR><LF>
	[ECHO] 	USB: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	PER: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	ADC: 48000000 Hz (48 MHz)<CR><LF>
[INFO] ADC initializing<CR><LF>
VREG register: 0x000010D1<CR><LF>
[INFO] I2C scanning...<CR><LF>

[2025-10-05 22:52:12] [INFO] [SERIAL RX] Chunk #2: 64 bytes
[2025-10-05 22:52:12] [INFO] [SERIAL RX] Content: [INFO] EEPROM initializing...<CR><LF>
[INFO] MCP23017 initializing...<CR><LF>

[2025-10-05 22:52:15] [INFO] [SERIAL RX] Chunk #3: 162 bytes
[2025-10-05 22:52:15] [INFO] [SERIAL RX] Content: [INFO] Headless mode, skipping display initialization<CR><LF>
[INFO] Initializing HLW8032...<CR><LF>
[INFO] Initializing buttons...<CR><LF>
[INFO] Loaded network config from EEPROM.<CR><LF>

[2025-10-05 22:52:16] [INFO] [SERIAL RX] Chunk #4: 456 bytes
[2025-10-05 22:52:16] [INFO] [SERIAL RX] Content: [INFO] W5500 version: 0x04<CR><LF>
[INFO] W5500 PHY link is up<CR><LF>
	[ECHO] =============================================<CR><LF>
	[ECHO]  W5500 network configuration : static<CR><LF>
	[ECHO]  MAC         : 00:08:DC:BE:EF:91<CR><LF>
	[ECHO]  IP          : 192.168.0.11<CR><LF>
	[ECHO]  Subnet Mask : 255.255.255.0<CR><LF>
	[ECHO]  Gateway     : 192.168.0.1<CR><LF>
	[ECHO]  DNS         : 8.8.8.8<CR><LF>
	[ECHO] =============================================<CR><LF>
<CR><LF>
SYSTEM READY<CR><LF>
[INFO] - SNMP : Start SNMP Agent Daemon<CR><LF>

[2025-10-05 22:52:16] [INFO] [SERIAL] Ready token 'SYSTEM READY' detected!
[2025-10-05 22:52:16] [INFO] [SERIAL RX] Total response: 1075 bytes in 4 chunks
[2025-10-05 22:52:16] [INFO] [SERIAL RX] Elapsed time: 8.305s
[2025-10-05 22:52:16] [INFO] [SERIAL RX] Full response:
[2025-10-05 22:52:16] [INFO] [INFO] Core 0 initializing...\r\n
	[ECHO] Device Serial : SN-369366060325\r\n
	[ECHO] Firmware Ver  : 1.0.0\r\n
	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
	[ECHO] Clock Sources :\r\n
	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
[INFO] ADC initializing\r\n
VREG register: 0x000010D1\r\n
[INFO] I2C scanning...\r\n
[INFO] EEPROM initializing...\r\n
[INFO] MCP23017 initializing...\r\n
[INFO] Headless mode, skipping display initialization\r\n
[INFO] Initializing HLW8032...\r\n
[INFO] Initializing buttons...\r\n
[INFO] Loaded network config from EEPROM.\r\n
[INFO] W5500 version: 0x04\r\n
[INFO] W5500 PHY link is up\r\n
	[ECHO] =============================================\r\n
	[ECHO]  W5500 network configuration : static\r\n
	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
	[ECHO]  IP          : 192.168.0.11\r\n
	[ECHO]  Subnet Mask : 255.255.255.0\r\n
	[ECHO]  Gateway     : 192.168.0.1\r\n
	[ECHO]  DNS         : 8.8.8.8\r\n
	[ECHO] =============================================\r\n
\r\n
SYSTEM READY\r\n
[INFO] - SNMP : Start SNMP Agent Daemon\r\n

[2025-10-05 22:52:16] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:16] [INFO]   0000  5B 49 4E 46 4F 5D 20 43 6F 72 65 20 30 20 69 6E   |[INFO] Core 0 in|
  0010  69 74 69 61 6C 69 7A 69 6E 67 2E 2E 2E 0D 0A 09   |itializing......|
  0020  5B 45 43 48 4F 5D 20 44 65 76 69 63 65 20 53 65   |[ECHO] Device Se|
  0030  72 69 61 6C 20 3A 20 53 4E 2D 33 36 39 33 36 36   |rial : SN-369366|
  0040  30 36 30 33 32 35 0D 0A 09 5B 45 43 48 4F 5D 20   |060325...[ECHO] |
  0050  46 69 72 6D 77 61 72 65 20 56 65 72 20 20 3A 20   |Firmware Ver  : |
  0060  31 2E 30 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 43   |1.0.0...[ECHO] C|
  0070  6F 72 65 20 76 6F 6C 74 61 67 65 20 20 3A 20 31   |ore voltage  : 1|
  0080  2E 31 35 20 56 20 28 76 73 65 6C 20 3D 20 31 29   |.15 V (vsel = 1)|
  0090  0D 0A 09 5B 45 43 48 4F 5D 20 43 6C 6F 63 6B 20   |...[ECHO] Clock |
  00A0  53 6F 75 72 63 65 73 20 3A 0D 0A 09 5B 45 43 48   |Sources :...[ECH|
  00B0  4F 5D 20 09 53 59 53 3A 20 32 30 30 30 30 30 30   |O] .SYS: 2000000|
  00C0  30 30 20 48 7A 20 28 32 30 30 20 4D 48 7A 29 0D   |00 Hz (200 MHz).|
  00D0  0A 09 5B 45 43 48 4F 5D 20 09 55 53 42 3A 20 34   |..[ECHO] .USB: 4|
  00E0  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  00F0  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 50 45   |Hz)...[ECHO] .PE|
  0100  52 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |R: 48000000 Hz (|
  0110  34 38 20 4D 48 7A 29 0D 0A 09 5B 45 43 48 4F 5D   |48 MHz)...[ECHO]|
  0120  20 09 41 44 43 3A 20 34 38 30 30 30 30 30 30 20   | .ADC: 48000000 |
  0130  48 7A 20 28 34 38 20 4D 48 7A 29 0D 0A 5B 49 4E   |Hz (48 MHz)..[IN|
  0140  46 4F 5D 20 41 44 43 20 69 6E 69 74 69 61 6C 69   |FO] ADC initiali|
  0150  7A 69 6E 67 0D 0A 56 52 45 47 20 72 65 67 69 73   |zing..VREG regis|
  0160  74 65 72 3A 20 30 78 30 30 30 30 31 30 44 31 0D   |ter: 0x000010D1.|
  0170  0A 5B 49 4E 46 4F 5D 20 49 32 43 20 73 63 61 6E   |.[INFO] I2C scan|
  0180  6E 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |ning.....[INFO] |
  0190  45 45 50 52 4F 4D 20 69 6E 69 74 69 61 6C 69 7A   |EEPROM initializ|
  01A0  69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20 4D   |ing.....[INFO] M|
  01B0  43 50 32 33 30 31 37 20 69 6E 69 74 69 61 6C 69   |CP23017 initiali|
  01C0  7A 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |zing.....[INFO] |
  01D0  48 65 61 64 6C 65 73 73 20 6D 6F 64 65 2C 20 73   |Headless mode, s|
  01E0  6B 69 70 70 69 6E 67 20 64 69 73 70 6C 61 79 20   |kipping display |
  01F0  69 6E 69 74 69 61 6C 69 7A 61 74 69 6F 6E 0D 0A   |initialization..|
  0200  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0210  69 6E 67 20 48 4C 57 38 30 33 32 2E 2E 2E 0D 0A   |ing HLW8032.....|
  0220  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0230  69 6E 67 20 62 75 74 74 6F 6E 73 2E 2E 2E 0D 0A   |ing buttons.....|
  0240  5B 49 4E 46 4F 5D 20 4C 6F 61 64 65 64 20 6E 65   |[INFO] Loaded ne|
  0250  74 77 6F 72 6B 20 63 6F 6E 66 69 67 20 66 72 6F   |twork config fro|
  0260  6D 20 45 45 50 52 4F 4D 2E 0D 0A 5B 49 4E 46 4F   |m EEPROM...[INFO|
  0270  5D 20 57 35 35 30 30 20 76 65 72 73 69 6F 6E 3A   |] W5500 version:|
  0280  20 30 78 30 34 0D 0A 5B 49 4E 46 4F 5D 20 57 35   | 0x04..[INFO] W5|
  0290  35 30 30 20 50 48 59 20 6C 69 6E 6B 20 69 73 20   |500 PHY link is |
  02A0  75 70 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D   |up...[ECHO] ====|
  02B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 09 5B 45 43 48   |=========...[ECH|
  02E0  4F 5D 20 20 57 35 35 30 30 20 6E 65 74 77 6F 72   |O]  W5500 networ|
  02F0  6B 20 63 6F 6E 66 69 67 75 72 61 74 69 6F 6E 20   |k configuration |
  0300  3A 20 73 74 61 74 69 63 0D 0A 09 5B 45 43 48 4F   |: static...[ECHO|
  0310  5D 20 20 4D 41 43 20 20 20 20 20 20 20 20 20 3A   |]  MAC         :|
  0320  20 30 30 3A 30 38 3A 44 43 3A 42 45 3A 45 46 3A   | 00:08:DC:BE:EF:|
  0330  39 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 49 50 20   |91...[ECHO]  IP |
  0340  20 20 20 20 20 20 20 20 20 3A 20 31 39 32 2E 31   |         : 192.1|
  0350  36 38 2E 30 2E 31 31 0D 0A 09 5B 45 43 48 4F 5D   |68.0.11...[ECHO]|
  0360  20 20 53 75 62 6E 65 74 20 4D 61 73 6B 20 3A 20   |  Subnet Mask : |
  0370  32 35 35 2E 32 35 35 2E 32 35 35 2E 30 0D 0A 09   |255.255.255.0...|
  0380  5B 45 43 48 4F 5D 20 20 47 61 74 65 77 61 79 20   |[ECHO]  Gateway |
  0390  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 30 2E   |    : 192.168.0.|
  03A0  31 0D 0A 09 5B 45 43 48 4F 5D 20 20 44 4E 53 20   |1...[ECHO]  DNS |
  03B0  20 20 20 20 20 20 20 20 3A 20 38 2E 38 2E 38 2E   |        : 8.8.8.|
  03C0  38 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D   |8...[ECHO] =====|
  03D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03F0  3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 0D 0A 53 59 53 54   |========....SYST|
  0400  45 4D 20 52 45 41 44 59 0D 0A 5B 49 4E 46 4F 5D   |EM READY..[INFO]|
  0410  20 2D 20 53 4E 4D 50 20 3A 20 53 74 61 72 74 20   | - SNMP : Start |
  0420  53 4E 4D 50 20 41 67 65 6E 74 20 44 61 65 6D 6F   |SNMP Agent Daemo|
  0430  6E 0D 0A                                          |n..|
[2025-10-05 22:52:16] [INFO] [SERIAL] Device ready! Returning True
[2025-10-05 22:52:16] [INFO] [SERIAL] Closed port COM11
[2025-10-05 22:52:16] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:16] [INFO] [SERIAL]   port=COM11, command='SYSINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:16] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:16] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:16] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:16] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:16] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:16] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:16] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:16] [INFO] [SERIAL TX] Sending command: 'SYSINFO'
[2025-10-05 22:52:16] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:52:16] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:16] [INFO]   0000  53 59 53 49 4E 46 4F 0D 0A                        |SYSINFO..|
[2025-10-05 22:52:16] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:52:16] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:16] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:16] [INFO] [SERIAL RX] Chunk #1: received 93 bytes (elapsed: 0.011s, total: 93 bytes)
[2025-10-05 22:52:17] [INFO] [SERIAL RX] Chunk #2: received 62 bytes (elapsed: 0.338s, total: 155 bytes)
[2025-10-05 22:52:17] [INFO] [SERIAL RX] Chunk #3: received 286 bytes (elapsed: 0.359s, total: 441 bytes)
[2025-10-05 22:52:17] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:52:17] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:52:17] [INFO] [SERIAL RX]   Total bytes: 441
[2025-10-05 22:52:17] [INFO] [SERIAL RX]   Chunks received: 3
[2025-10-05 22:52:17] [INFO] [SERIAL RX]   Total time: 0.863s
[2025-10-05 22:52:17] [INFO] [SERIAL RX] Decoded text (441 characters):
[2025-10-05 22:52:17] [INFO]   [INFO] HTTP server listening on port 80\r\n
  [INFO] - [1] UDP Socket for SNMP Agent, port [161]\r\n
  	[ECHO] Received CMD: "SYSINFO"\r\n
  	[ECHO] SYSTEM INFORMATION:\r\n
  	[ECHO] Device Serial : SN-369366060325\r\n
  	[ECHO] Firmware Ver  : 1.0.0\r\n
  	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
  	[ECHO] Clock Sources :\r\n
  	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
  	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
  	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
  	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
  
[2025-10-05 22:52:17] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:17] [INFO]   0000  5B 49 4E 46 4F 5D 20 48 54 54 50 20 73 65 72 76   |[INFO] HTTP serv|
  0010  65 72 20 6C 69 73 74 65 6E 69 6E 67 20 6F 6E 20   |er listening on |
  0020  70 6F 72 74 20 38 30 0D 0A 5B 49 4E 46 4F 5D 20   |port 80..[INFO] |
  0030  2D 20 5B 31 5D 20 55 44 50 20 53 6F 63 6B 65 74   |- [1] UDP Socket|
  0040  20 66 6F 72 20 53 4E 4D 50 20 41 67 65 6E 74 2C   | for SNMP Agent,|
  0050  20 70 6F 72 74 20 5B 31 36 31 5D 0D 0A 09 5B 45   | port [161]...[E|
  0060  43 48 4F 5D 20 52 65 63 65 69 76 65 64 20 43 4D   |CHO] Received CM|
  0070  44 3A 20 22 53 59 53 49 4E 46 4F 22 0D 0A 09 5B   |D: "SYSINFO"...[|
  0080  45 43 48 4F 5D 20 53 59 53 54 45 4D 20 49 4E 46   |ECHO] SYSTEM INF|
  0090  4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09 5B 45 43 48   |ORMATION:...[ECH|
  00A0  4F 5D 20 44 65 76 69 63 65 20 53 65 72 69 61 6C   |O] Device Serial|
  00B0  20 3A 20 53 4E 2D 33 36 39 33 36 36 30 36 30 33   | : SN-3693660603|
  00C0  32 35 0D 0A 09 5B 45 43 48 4F 5D 20 46 69 72 6D   |25...[ECHO] Firm|
  00D0  77 61 72 65 20 56 65 72 20 20 3A 20 31 2E 30 2E   |ware Ver  : 1.0.|
  00E0  30 0D 0A 09 5B 45 43 48 4F 5D 20 43 6F 72 65 20   |0...[ECHO] Core |
  00F0  76 6F 6C 74 61 67 65 20 20 3A 20 31 2E 31 35 20   |voltage  : 1.15 |
  0100  56 20 28 76 73 65 6C 20 3D 20 31 29 0D 0A 09 5B   |V (vsel = 1)...[|
  0110  45 43 48 4F 5D 20 43 6C 6F 63 6B 20 53 6F 75 72   |ECHO] Clock Sour|
  0120  63 65 73 20 3A 0D 0A 09 5B 45 43 48 4F 5D 20 09   |ces :...[ECHO] .|
  0130  53 59 53 3A 20 32 30 30 30 30 30 30 30 30 20 48   |SYS: 200000000 H|
  0140  7A 20 28 32 30 30 20 4D 48 7A 29 0D 0A 09 5B 45   |z (200 MHz)...[E|
  0150  43 48 4F 5D 20 09 55 53 42 3A 20 34 38 30 30 30   |CHO] .USB: 48000|
  0160  30 30 30 20 48 7A 20 28 34 38 20 4D 48 7A 29 0D   |000 Hz (48 MHz).|
  0170  0A 09 5B 45 43 48 4F 5D 20 09 50 45 52 3A 20 34   |..[ECHO] .PER: 4|
  0180  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  0190  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 41 44   |Hz)...[ECHO] .AD|
  01A0  43 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |C: 48000000 Hz (|
  01B0  34 38 20 4D 48 7A 29 0D 0A                        |48 MHz)..|
[2025-10-05 22:52:17] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:17] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:17] [INFO] [SERIAL] parse_sysinfo_response() called
[2025-10-05 22:52:17] [INFO] [SERIAL]   Response length: 441 characters
[2025-10-05 22:52:17] [INFO] [SERIAL] Parsing 12 lines from response
[2025-10-05 22:52:17] [INFO] [SERIAL] Parsed 8 fields from SYSINFO:
[2025-10-05 22:52:17] [INFO] [SERIAL]   Received CMD: "SYSINFO"
[2025-10-05 22:52:17] [INFO] [SERIAL]   Serial: SN-369366060325
[2025-10-05 22:52:17] [INFO] [SERIAL]   Firmware: 1.0.0
[2025-10-05 22:52:17] [INFO] [SERIAL]   Core Voltage: 1.15 V (vsel = 1)
[2025-10-05 22:52:17] [INFO] [SERIAL]   SYS Frequency: 200000000 Hz (200 MHz)
[2025-10-05 22:52:17] [INFO] [SERIAL]   USB Frequency: 48000000 Hz (48 MHz)
[2025-10-05 22:52:17] [INFO] [SERIAL]   PER Frequency: 48000000 Hz (48 MHz)
[2025-10-05 22:52:17] [INFO] [SERIAL]   ADC Frequency: 48000000 Hz (48 MHz)
[2025-10-05 22:52:17] [PASS] STEP 5.1 completed successfully

STEP 6 Verify factory defaults restored

PASS

Started	Finished
2025-10-05 22:52:17	2025-10-05 22:52:19

Substeps

STEP 6.1 Get network config after factory reset

PASS

Started	Finished
2025-10-05 22:52:17	2025-10-05 22:52:18

Log

[2025-10-05 22:52:17] [STEP 6.1] Get network config after factory reset
[2025-10-05 22:52:17] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:17] [INFO] [SERIAL]   port=COM11, command='NETINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:17] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:17] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:17] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:17] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:17] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:17] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:17] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:17] [INFO] [SERIAL TX] Sending command: 'NETINFO'
[2025-10-05 22:52:17] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:52:17] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:17] [INFO]   0000  4E 45 54 49 4E 46 4F 0D 0A                        |NETINFO..|
[2025-10-05 22:52:17] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:52:17] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:17] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:18] [INFO] [SERIAL RX] Chunk #1: received 407 bytes (elapsed: 0.206s, total: 407 bytes)
[2025-10-05 22:52:18] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:52:18] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:52:18] [INFO] [SERIAL RX]   Total bytes: 407
[2025-10-05 22:52:18] [INFO] [SERIAL RX]   Chunks received: 1
[2025-10-05 22:52:18] [INFO] [SERIAL RX]   Total time: 0.713s
[2025-10-05 22:52:18] [INFO] [SERIAL RX] Decoded text (407 characters):
[2025-10-05 22:52:18] [INFO]   	[ECHO] Received CMD: "NETINFO"\r\n
  	[ECHO] NETWORK INFORMATION:\r\n
  	[ECHO] =============================================\r\n
  	[ECHO]  W5500 network configuration : static\r\n
  	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
  	[ECHO]  IP          : 192.168.0.11\r\n
  	[ECHO]  Subnet Mask : 255.255.255.0\r\n
  	[ECHO]  Gateway     : 192.168.0.1\r\n
  	[ECHO]  DNS         : 8.8.8.8\r\n
  	[ECHO] =============================================\r\n
  \r\n
  
[2025-10-05 22:52:18] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:18] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 4E 45 54 49 4E 46 4F 22 0D   | CMD: "NETINFO".|
  0020  0A 09 5B 45 43 48 4F 5D 20 4E 45 54 57 4F 52 4B   |..[ECHO] NETWORK|
  0030  20 49 4E 46 4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09   | INFORMATION:...|
  0040  5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D   |[ECHO] =========|
  0050  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0060  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0070  3D 3D 3D 3D 0D 0A 09 5B 45 43 48 4F 5D 20 20 57   |====...[ECHO]  W|
  0080  35 35 30 30 20 6E 65 74 77 6F 72 6B 20 63 6F 6E   |5500 network con|
  0090  66 69 67 75 72 61 74 69 6F 6E 20 3A 20 73 74 61   |figuration : sta|
  00A0  74 69 63 0D 0A 09 5B 45 43 48 4F 5D 20 20 4D 41   |tic...[ECHO]  MA|
  00B0  43 20 20 20 20 20 20 20 20 20 3A 20 30 30 3A 30   |C         : 00:0|
  00C0  38 3A 44 43 3A 42 45 3A 45 46 3A 39 31 0D 0A 09   |8:DC:BE:EF:91...|
  00D0  5B 45 43 48 4F 5D 20 20 49 50 20 20 20 20 20 20   |[ECHO]  IP      |
  00E0  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 30 2E   |    : 192.168.0.|
  00F0  31 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 53 75 62   |11...[ECHO]  Sub|
  0100  6E 65 74 20 4D 61 73 6B 20 3A 20 32 35 35 2E 32   |net Mask : 255.2|
  0110  35 35 2E 32 35 35 2E 30 0D 0A 09 5B 45 43 48 4F   |55.255.0...[ECHO|
  0120  5D 20 20 47 61 74 65 77 61 79 20 20 20 20 20 3A   |]  Gateway     :|
  0130  20 31 39 32 2E 31 36 38 2E 30 2E 31 0D 0A 09 5B   | 192.168.0.1...[|
  0140  45 43 48 4F 5D 20 20 44 4E 53 20 20 20 20 20 20   |ECHO]  DNS      |
  0150  20 20 20 3A 20 38 2E 38 2E 38 2E 38 0D 0A 09 5B   |   : 8.8.8.8...[|
  0160  45 43 48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |ECHO] ==========|
  0170  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0180  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  0190  3D 3D 3D 0D 0A 0D 0A                              |===....|
[2025-10-05 22:52:18] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:18] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:18] [PASS] STEP 6.1 completed successfully

STEP 6.2 Verify baseline network config restored

PASS

Started	Finished
2025-10-05 22:52:18	2025-10-05 22:52:18

Log

[2025-10-05 22:52:18] [STEP 6.2] Verify baseline network config restored
[2025-10-05 22:52:18] [PASS] STEP 6.2 completed successfully

STEP 6.3 Verify all channels reset to OFF

PASS

Started	Finished
2025-10-05 22:52:18	2025-10-05 22:52:19

Log

[2025-10-05 22:52:18] [STEP 6.3] Verify all channels reset to OFF
[2025-10-05 22:52:18] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:18] [INFO] [SERIAL]   port=COM11, command='GET_CH ALL', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:18] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:18] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:18] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:18] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:18] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:18] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:18] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:18] [INFO] [SERIAL TX] Sending command: 'GET_CH ALL'
[2025-10-05 22:52:18] [INFO] [SERIAL TX] Payload length: 12 bytes (including CR+LF)
[2025-10-05 22:52:18] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:18] [INFO]   0000  47 45 54 5F 43 48 20 41 4C 4C 0D 0A               |GET_CH ALL..|
[2025-10-05 22:52:18] [INFO] [SERIAL TX] Wrote 12 bytes to port
[2025-10-05 22:52:18] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:18] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:18] [INFO] [SERIAL RX] Chunk #1: received 108 bytes (elapsed: 0.194s, total: 108 bytes)
[2025-10-05 22:52:18] [INFO] [SERIAL RX] Chunk #2: received 72 bytes (elapsed: 0.204s, total: 180 bytes)
[2025-10-05 22:52:19] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:52:19] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:52:19] [INFO] [SERIAL RX]   Total bytes: 180
[2025-10-05 22:52:19] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:52:19] [INFO] [SERIAL RX]   Total time: 0.712s
[2025-10-05 22:52:19] [INFO] [SERIAL RX] Decoded text (180 characters):
[2025-10-05 22:52:19] [INFO]   	[ECHO] Received CMD: "GET_CH ALL"\r\n
  	[ECHO] CH1: OFF\r\n
  	[ECHO] CH2: OFF\r\n
  	[ECHO] CH3: OFF\r\n
  	[ECHO] CH4: OFF\r\n
  	[ECHO] CH5: OFF\r\n
  	[ECHO] CH6: OFF\r\n
  	[ECHO] CH7: OFF\r\n
  	[ECHO] CH8: OFF\r\n
  
[2025-10-05 22:52:19] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:19] [INFO]   0000  09 5B 45 43 48 4F 5D 20 52 65 63 65 69 76 65 64   |.[ECHO] Received|
  0010  20 43 4D 44 3A 20 22 47 45 54 5F 43 48 20 41 4C   | CMD: "GET_CH AL|
  0020  4C 22 0D 0A 09 5B 45 43 48 4F 5D 20 43 48 31 3A   |L"...[ECHO] CH1:|
  0030  20 4F 46 46 0D 0A 09 5B 45 43 48 4F 5D 20 43 48   | OFF...[ECHO] CH|
  0040  32 3A 20 4F 46 46 0D 0A 09 5B 45 43 48 4F 5D 20   |2: OFF...[ECHO] |
  0050  43 48 33 3A 20 4F 46 46 0D 0A 09 5B 45 43 48 4F   |CH3: OFF...[ECHO|
  0060  5D 20 43 48 34 3A 20 4F 46 46 0D 0A 09 5B 45 43   |] CH4: OFF...[EC|
  0070  48 4F 5D 20 43 48 35 3A 20 4F 46 46 0D 0A 09 5B   |HO] CH5: OFF...[|
  0080  45 43 48 4F 5D 20 43 48 36 3A 20 4F 46 46 0D 0A   |ECHO] CH6: OFF..|
  0090  09 5B 45 43 48 4F 5D 20 43 48 37 3A 20 4F 46 46   |.[ECHO] CH7: OFF|
  00A0  0D 0A 09 5B 45 43 48 4F 5D 20 43 48 38 3A 20 4F   |...[ECHO] CH8: O|
  00B0  46 46 0D 0A                                       |FF..|
[2025-10-05 22:52:19] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:19] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:19] [INFO] [SERIAL] parse_get_ch_all() called
[2025-10-05 22:52:19] [INFO] [SERIAL]   Response length: 180 characters
[2025-10-05 22:52:19] [INFO] [SERIAL] Parsing 9 lines for channel states
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH1 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH2 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH3 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH4 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH5 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH6 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH7 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH8 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL] Parsed 8 channel states
[2025-10-05 22:52:19] [INFO] [SERIAL] parse_get_ch_all() called
[2025-10-05 22:52:19] [INFO] [SERIAL]   Response length: 180 characters
[2025-10-05 22:52:19] [INFO] [SERIAL] Parsing 9 lines for channel states
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH1 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH2 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH3 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH4 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH5 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH6 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH7 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL]   Found: CH8 = OFF
[2025-10-05 22:52:19] [INFO] [SERIAL] Parsed 8 channel states
[2025-10-05 22:52:19] [PASS] STEP 6.3 completed successfully

STEP 7 Multiple reboot cycle stability test

PASS

Started	Finished
2025-10-05 22:52:19	2025-10-05 22:52:48

Substeps

STEP 7.1 Reboot cycle 1

PASS

Started	Finished
2025-10-05 22:52:19	2025-10-05 22:52:28

Log

[2025-10-05 22:52:19] [STEP 7.1] Reboot cycle 1
[2025-10-05 22:52:19] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:19] [INFO] [SERIAL]   port=COM11, command='REBOOT', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:19] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:19] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:19] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:19] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:19] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:19] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:19] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:19] [INFO] [SERIAL TX] Sending command: 'REBOOT'
[2025-10-05 22:52:19] [INFO] [SERIAL TX] Payload length: 8 bytes (including CR+LF)
[2025-10-05 22:52:19] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:19] [INFO]   0000  52 45 42 4F 4F 54 0D 0A                           |REBOOT..|
[2025-10-05 22:52:19] [INFO] [SERIAL TX] Wrote 8 bytes to port
[2025-10-05 22:52:19] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:19] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:19] [INFO] [SERIAL RX] Chunk #1: received 32 bytes (elapsed: 0.195s, total: 32 bytes)
[2025-10-05 22:52:19] [ERROR] [SERIAL ERROR] Exception during send_command:
[2025-10-05 22:52:19] [ERROR] [SERIAL ERROR]   Type: SerialException
[2025-10-05 22:52:19] [ERROR] [SERIAL ERROR]   Message: ClearCommError failed (PermissionError(13, 'The device does not recognize the command.', None, 22))
[2025-10-05 22:52:19] [ERROR] [SERIAL ERROR]   Port: COM11, Command: 'REBOOT'
[2025-10-05 22:52:19] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:19] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:19] [INFO] [SERIAL] wait_for_reboot_and_ready() called
[2025-10-05 22:52:19] [INFO] [SERIAL]   port=COM11, ready_token='SYSTEM READY', baudrate=115200, timeout=15.0s
[2025-10-05 22:52:19] [INFO] [SERIAL] Waiting 200ms for device to start rebooting...
[2025-10-05 22:52:19] [INFO] [SERIAL] Connection attempt #1 (remaining timeout: 14.8s)
[2025-10-05 22:52:19] [INFO] [SERIAL] Connection attempt #1 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:19] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #2 (remaining timeout: 14.6s)
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #2 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:20] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #3 (remaining timeout: 14.4s)
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #3 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:20] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #4 (remaining timeout: 14.2s)
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #4 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:20] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #5 (remaining timeout: 14.0s)
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #5 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:20] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #6 (remaining timeout: 13.8s)
[2025-10-05 22:52:20] [INFO] [SERIAL] Connection attempt #6 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:20] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:21] [INFO] [SERIAL] Connection attempt #7 (remaining timeout: 13.6s)
[2025-10-05 22:52:21] [INFO] [SERIAL] Connected to port COM11 on attempt #7
[2025-10-05 22:52:21] [INFO] [SERIAL RX] Monitoring for ready token: 'SYSTEM READY'
[2025-10-05 22:52:24] [INFO] [SERIAL RX] Chunk #1: 393 bytes
[2025-10-05 22:52:24] [INFO] [SERIAL RX] Content: [INFO] Core 0 initializing...<CR><LF>
	[ECHO] Device Serial : SN-369366060325<CR><LF>
	[ECHO] Firmware Ver  : 1.0.0<CR><LF>
	[ECHO] Core voltage  : 1.15 V (vsel = 1)<CR><LF>
	[ECHO] Clock Sources :<CR><LF>
	[ECHO] 	SYS: 200000000 Hz (200 MHz)<CR><LF>
	[ECHO] 	USB: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	PER: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	ADC: 48000000 Hz (48 MHz)<CR><LF>
[INFO] ADC initializing<CR><LF>
VREG register: 0x000010D1<CR><LF>
[INFO] I2C scanning...<CR><LF>

[2025-10-05 22:52:24] [INFO] [SERIAL RX] Chunk #2: 64 bytes
[2025-10-05 22:52:24] [INFO] [SERIAL RX] Content: [INFO] EEPROM initializing...<CR><LF>
[INFO] MCP23017 initializing...<CR><LF>

[2025-10-05 22:52:26] [INFO] [SERIAL RX] Chunk #3: 162 bytes
[2025-10-05 22:52:26] [INFO] [SERIAL RX] Content: [INFO] Headless mode, skipping display initialization<CR><LF>
[INFO] Initializing HLW8032...<CR><LF>
[INFO] Initializing buttons...<CR><LF>
[INFO] Loaded network config from EEPROM.<CR><LF>

[2025-10-05 22:52:28] [INFO] [SERIAL RX] Chunk #4: 456 bytes
[2025-10-05 22:52:28] [INFO] [SERIAL RX] Content: [INFO] W5500 version: 0x04<CR><LF>
[INFO] W5500 PHY link is up<CR><LF>
	[ECHO] =============================================<CR><LF>
	[ECHO]  W5500 network configuration : static<CR><LF>
	[ECHO]  MAC         : 00:08:DC:BE:EF:91<CR><LF>
	[ECHO]  IP          : 192.168.0.11<CR><LF>
	[ECHO]  Subnet Mask : 255.255.255.0<CR><LF>
	[ECHO]  Gateway     : 192.168.0.1<CR><LF>
	[ECHO]  DNS         : 8.8.8.8<CR><LF>
	[ECHO] =============================================<CR><LF>
<CR><LF>
SYSTEM READY<CR><LF>
[INFO] - SNMP : Start SNMP Agent Daemon<CR><LF>

[2025-10-05 22:52:28] [INFO] [SERIAL] Ready token 'SYSTEM READY' detected!
[2025-10-05 22:52:28] [INFO] [SERIAL RX] Total response: 1075 bytes in 4 chunks
[2025-10-05 22:52:28] [INFO] [SERIAL RX] Elapsed time: 8.299s
[2025-10-05 22:52:28] [INFO] [SERIAL RX] Full response:
[2025-10-05 22:52:28] [INFO] [INFO] Core 0 initializing...\r\n
	[ECHO] Device Serial : SN-369366060325\r\n
	[ECHO] Firmware Ver  : 1.0.0\r\n
	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
	[ECHO] Clock Sources :\r\n
	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
[INFO] ADC initializing\r\n
VREG register: 0x000010D1\r\n
[INFO] I2C scanning...\r\n
[INFO] EEPROM initializing...\r\n
[INFO] MCP23017 initializing...\r\n
[INFO] Headless mode, skipping display initialization\r\n
[INFO] Initializing HLW8032...\r\n
[INFO] Initializing buttons...\r\n
[INFO] Loaded network config from EEPROM.\r\n
[INFO] W5500 version: 0x04\r\n
[INFO] W5500 PHY link is up\r\n
	[ECHO] =============================================\r\n
	[ECHO]  W5500 network configuration : static\r\n
	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
	[ECHO]  IP          : 192.168.0.11\r\n
	[ECHO]  Subnet Mask : 255.255.255.0\r\n
	[ECHO]  Gateway     : 192.168.0.1\r\n
	[ECHO]  DNS         : 8.8.8.8\r\n
	[ECHO] =============================================\r\n
\r\n
SYSTEM READY\r\n
[INFO] - SNMP : Start SNMP Agent Daemon\r\n

[2025-10-05 22:52:28] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:28] [INFO]   0000  5B 49 4E 46 4F 5D 20 43 6F 72 65 20 30 20 69 6E   |[INFO] Core 0 in|
  0010  69 74 69 61 6C 69 7A 69 6E 67 2E 2E 2E 0D 0A 09   |itializing......|
  0020  5B 45 43 48 4F 5D 20 44 65 76 69 63 65 20 53 65   |[ECHO] Device Se|
  0030  72 69 61 6C 20 3A 20 53 4E 2D 33 36 39 33 36 36   |rial : SN-369366|
  0040  30 36 30 33 32 35 0D 0A 09 5B 45 43 48 4F 5D 20   |060325...[ECHO] |
  0050  46 69 72 6D 77 61 72 65 20 56 65 72 20 20 3A 20   |Firmware Ver  : |
  0060  31 2E 30 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 43   |1.0.0...[ECHO] C|
  0070  6F 72 65 20 76 6F 6C 74 61 67 65 20 20 3A 20 31   |ore voltage  : 1|
  0080  2E 31 35 20 56 20 28 76 73 65 6C 20 3D 20 31 29   |.15 V (vsel = 1)|
  0090  0D 0A 09 5B 45 43 48 4F 5D 20 43 6C 6F 63 6B 20   |...[ECHO] Clock |
  00A0  53 6F 75 72 63 65 73 20 3A 0D 0A 09 5B 45 43 48   |Sources :...[ECH|
  00B0  4F 5D 20 09 53 59 53 3A 20 32 30 30 30 30 30 30   |O] .SYS: 2000000|
  00C0  30 30 20 48 7A 20 28 32 30 30 20 4D 48 7A 29 0D   |00 Hz (200 MHz).|
  00D0  0A 09 5B 45 43 48 4F 5D 20 09 55 53 42 3A 20 34   |..[ECHO] .USB: 4|
  00E0  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  00F0  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 50 45   |Hz)...[ECHO] .PE|
  0100  52 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |R: 48000000 Hz (|
  0110  34 38 20 4D 48 7A 29 0D 0A 09 5B 45 43 48 4F 5D   |48 MHz)...[ECHO]|
  0120  20 09 41 44 43 3A 20 34 38 30 30 30 30 30 30 20   | .ADC: 48000000 |
  0130  48 7A 20 28 34 38 20 4D 48 7A 29 0D 0A 5B 49 4E   |Hz (48 MHz)..[IN|
  0140  46 4F 5D 20 41 44 43 20 69 6E 69 74 69 61 6C 69   |FO] ADC initiali|
  0150  7A 69 6E 67 0D 0A 56 52 45 47 20 72 65 67 69 73   |zing..VREG regis|
  0160  74 65 72 3A 20 30 78 30 30 30 30 31 30 44 31 0D   |ter: 0x000010D1.|
  0170  0A 5B 49 4E 46 4F 5D 20 49 32 43 20 73 63 61 6E   |.[INFO] I2C scan|
  0180  6E 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |ning.....[INFO] |
  0190  45 45 50 52 4F 4D 20 69 6E 69 74 69 61 6C 69 7A   |EEPROM initializ|
  01A0  69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20 4D   |ing.....[INFO] M|
  01B0  43 50 32 33 30 31 37 20 69 6E 69 74 69 61 6C 69   |CP23017 initiali|
  01C0  7A 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |zing.....[INFO] |
  01D0  48 65 61 64 6C 65 73 73 20 6D 6F 64 65 2C 20 73   |Headless mode, s|
  01E0  6B 69 70 70 69 6E 67 20 64 69 73 70 6C 61 79 20   |kipping display |
  01F0  69 6E 69 74 69 61 6C 69 7A 61 74 69 6F 6E 0D 0A   |initialization..|
  0200  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0210  69 6E 67 20 48 4C 57 38 30 33 32 2E 2E 2E 0D 0A   |ing HLW8032.....|
  0220  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0230  69 6E 67 20 62 75 74 74 6F 6E 73 2E 2E 2E 0D 0A   |ing buttons.....|
  0240  5B 49 4E 46 4F 5D 20 4C 6F 61 64 65 64 20 6E 65   |[INFO] Loaded ne|
  0250  74 77 6F 72 6B 20 63 6F 6E 66 69 67 20 66 72 6F   |twork config fro|
  0260  6D 20 45 45 50 52 4F 4D 2E 0D 0A 5B 49 4E 46 4F   |m EEPROM...[INFO|
  0270  5D 20 57 35 35 30 30 20 76 65 72 73 69 6F 6E 3A   |] W5500 version:|
  0280  20 30 78 30 34 0D 0A 5B 49 4E 46 4F 5D 20 57 35   | 0x04..[INFO] W5|
  0290  35 30 30 20 50 48 59 20 6C 69 6E 6B 20 69 73 20   |500 PHY link is |
  02A0  75 70 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D   |up...[ECHO] ====|
  02B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 09 5B 45 43 48   |=========...[ECH|
  02E0  4F 5D 20 20 57 35 35 30 30 20 6E 65 74 77 6F 72   |O]  W5500 networ|
  02F0  6B 20 63 6F 6E 66 69 67 75 72 61 74 69 6F 6E 20   |k configuration |
  0300  3A 20 73 74 61 74 69 63 0D 0A 09 5B 45 43 48 4F   |: static...[ECHO|
  0310  5D 20 20 4D 41 43 20 20 20 20 20 20 20 20 20 3A   |]  MAC         :|
  0320  20 30 30 3A 30 38 3A 44 43 3A 42 45 3A 45 46 3A   | 00:08:DC:BE:EF:|
  0330  39 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 49 50 20   |91...[ECHO]  IP |
  0340  20 20 20 20 20 20 20 20 20 3A 20 31 39 32 2E 31   |         : 192.1|
  0350  36 38 2E 30 2E 31 31 0D 0A 09 5B 45 43 48 4F 5D   |68.0.11...[ECHO]|
  0360  20 20 53 75 62 6E 65 74 20 4D 61 73 6B 20 3A 20   |  Subnet Mask : |
  0370  32 35 35 2E 32 35 35 2E 32 35 35 2E 30 0D 0A 09   |255.255.255.0...|
  0380  5B 45 43 48 4F 5D 20 20 47 61 74 65 77 61 79 20   |[ECHO]  Gateway |
  0390  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 30 2E   |    : 192.168.0.|
  03A0  31 0D 0A 09 5B 45 43 48 4F 5D 20 20 44 4E 53 20   |1...[ECHO]  DNS |
  03B0  20 20 20 20 20 20 20 20 3A 20 38 2E 38 2E 38 2E   |        : 8.8.8.|
  03C0  38 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D   |8...[ECHO] =====|
  03D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03F0  3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 0D 0A 53 59 53 54   |========....SYST|
  0400  45 4D 20 52 45 41 44 59 0D 0A 5B 49 4E 46 4F 5D   |EM READY..[INFO]|
  0410  20 2D 20 53 4E 4D 50 20 3A 20 53 74 61 72 74 20   | - SNMP : Start |
  0420  53 4E 4D 50 20 41 67 65 6E 74 20 44 61 65 6D 6F   |SNMP Agent Daemo|
  0430  6E 0D 0A                                          |n..|
[2025-10-05 22:52:28] [INFO] [SERIAL] Device ready! Returning True
[2025-10-05 22:52:28] [INFO] [SERIAL] Closed port COM11
[2025-10-05 22:52:28] [PASS] STEP 7.1 completed successfully

STEP 7.2 Verify ready after reboot 1

PASS

Started	Finished
2025-10-05 22:52:28	2025-10-05 22:52:29

Log

[2025-10-05 22:52:28] [STEP 7.2] Verify ready after reboot 1
[2025-10-05 22:52:28] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:28] [INFO] [SERIAL]   port=COM11, command='NETINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:28] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:28] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:28] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:28] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:28] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:28] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:28] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:28] [INFO] [SERIAL TX] Sending command: 'NETINFO'
[2025-10-05 22:52:28] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:52:28] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:28] [INFO]   0000  4E 45 54 49 4E 46 4F 0D 0A                        |NETINFO..|
[2025-10-05 22:52:28] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:52:28] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:28] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:28] [INFO] [SERIAL RX] Chunk #1: received 93 bytes (elapsed: 0.021s, total: 93 bytes)
[2025-10-05 22:52:28] [INFO] [SERIAL RX] Chunk #2: received 407 bytes (elapsed: 0.349s, total: 500 bytes)
[2025-10-05 22:52:29] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:52:29] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:52:29] [INFO] [SERIAL RX]   Total bytes: 500
[2025-10-05 22:52:29] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:52:29] [INFO] [SERIAL RX]   Total time: 0.850s
[2025-10-05 22:52:29] [INFO] [SERIAL RX] Decoded text (500 characters):
[2025-10-05 22:52:29] [INFO]   [INFO] HTTP server listening on port 80\r\n
  [INFO] - [1] UDP Socket for SNMP Agent, port [161]\r\n
  	[ECHO] Received CMD: "NETINFO"\r\n
  	[ECHO] NETWORK INFORMATION:\r\n
  	[ECHO] =============================================\r\n
  	[ECHO]  W5500 network configuration : static\r\n
  	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
  	[ECHO]  IP          : 192.168.0.11\r\n
  	[ECHO]  Subnet Mask : 255.255.255.0\r\n
  	[ECHO]  Gateway     : 192.168.0.1\r\n
  	[ECHO]  DNS         : 8.8.8.8\r\n
  	[ECHO] =============================================\r\n
  \r\n
  
[2025-10-05 22:52:29] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:29] [INFO]   0000  5B 49 4E 46 4F 5D 20 48 54 54 50 20 73 65 72 76   |[INFO] HTTP serv|
  0010  65 72 20 6C 69 73 74 65 6E 69 6E 67 20 6F 6E 20   |er listening on |
  0020  70 6F 72 74 20 38 30 0D 0A 5B 49 4E 46 4F 5D 20   |port 80..[INFO] |
  0030  2D 20 5B 31 5D 20 55 44 50 20 53 6F 63 6B 65 74   |- [1] UDP Socket|
  0040  20 66 6F 72 20 53 4E 4D 50 20 41 67 65 6E 74 2C   | for SNMP Agent,|
  0050  20 70 6F 72 74 20 5B 31 36 31 5D 0D 0A 09 5B 45   | port [161]...[E|
  0060  43 48 4F 5D 20 52 65 63 65 69 76 65 64 20 43 4D   |CHO] Received CM|
  0070  44 3A 20 22 4E 45 54 49 4E 46 4F 22 0D 0A 09 5B   |D: "NETINFO"...[|
  0080  45 43 48 4F 5D 20 4E 45 54 57 4F 52 4B 20 49 4E   |ECHO] NETWORK IN|
  0090  46 4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09 5B 45 43   |FORMATION:...[EC|
  00A0  48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |HO] ============|
  00B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00D0  3D 0D 0A 09 5B 45 43 48 4F 5D 20 20 57 35 35 30   |=...[ECHO]  W550|
  00E0  30 20 6E 65 74 77 6F 72 6B 20 63 6F 6E 66 69 67   |0 network config|
  00F0  75 72 61 74 69 6F 6E 20 3A 20 73 74 61 74 69 63   |uration : static|
  0100  0D 0A 09 5B 45 43 48 4F 5D 20 20 4D 41 43 20 20   |...[ECHO]  MAC  |
  0110  20 20 20 20 20 20 20 3A 20 30 30 3A 30 38 3A 44   |       : 00:08:D|
  0120  43 3A 42 45 3A 45 46 3A 39 31 0D 0A 09 5B 45 43   |C:BE:EF:91...[EC|
  0130  48 4F 5D 20 20 49 50 20 20 20 20 20 20 20 20 20   |HO]  IP         |
  0140  20 3A 20 31 39 32 2E 31 36 38 2E 30 2E 31 31 0D   | : 192.168.0.11.|
  0150  0A 09 5B 45 43 48 4F 5D 20 20 53 75 62 6E 65 74   |..[ECHO]  Subnet|
  0160  20 4D 61 73 6B 20 3A 20 32 35 35 2E 32 35 35 2E   | Mask : 255.255.|
  0170  32 35 35 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 20   |255.0...[ECHO]  |
  0180  47 61 74 65 77 61 79 20 20 20 20 20 3A 20 31 39   |Gateway     : 19|
  0190  32 2E 31 36 38 2E 30 2E 31 0D 0A 09 5B 45 43 48   |2.168.0.1...[ECH|
  01A0  4F 5D 20 20 44 4E 53 20 20 20 20 20 20 20 20 20   |O]  DNS         |
  01B0  3A 20 38 2E 38 2E 38 2E 38 0D 0A 09 5B 45 43 48   |: 8.8.8.8...[ECH|
  01C0  4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |O] =============|
  01D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01F0  0D 0A 0D 0A                                       |....|
[2025-10-05 22:52:29] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:29] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:29] [PASS] STEP 7.2 completed successfully

STEP 7.3 Reboot cycle 2

PASS

Started	Finished
2025-10-05 22:52:29	2025-10-05 22:52:37

Log

[2025-10-05 22:52:29] [STEP 7.3] Reboot cycle 2
[2025-10-05 22:52:29] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:29] [INFO] [SERIAL]   port=COM11, command='REBOOT', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:29] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:29] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:29] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:29] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:29] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:29] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:29] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:29] [INFO] [SERIAL TX] Sending command: 'REBOOT'
[2025-10-05 22:52:29] [INFO] [SERIAL TX] Payload length: 8 bytes (including CR+LF)
[2025-10-05 22:52:29] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:29] [INFO]   0000  52 45 42 4F 4F 54 0D 0A                           |REBOOT..|
[2025-10-05 22:52:29] [INFO] [SERIAL TX] Wrote 8 bytes to port
[2025-10-05 22:52:29] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:29] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:29] [INFO] [SERIAL RX] Chunk #1: received 32 bytes (elapsed: 0.204s, total: 32 bytes)
[2025-10-05 22:52:29] [ERROR] [SERIAL ERROR] Exception during send_command:
[2025-10-05 22:52:29] [ERROR] [SERIAL ERROR]   Type: SerialException
[2025-10-05 22:52:29] [ERROR] [SERIAL ERROR]   Message: ClearCommError failed (PermissionError(13, 'The device does not recognize the command.', None, 22))
[2025-10-05 22:52:29] [ERROR] [SERIAL ERROR]   Port: COM11, Command: 'REBOOT'
[2025-10-05 22:52:29] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:29] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:29] [INFO] [SERIAL] wait_for_reboot_and_ready() called
[2025-10-05 22:52:29] [INFO] [SERIAL]   port=COM11, ready_token='SYSTEM READY', baudrate=115200, timeout=15.0s
[2025-10-05 22:52:29] [INFO] [SERIAL] Waiting 200ms for device to start rebooting...
[2025-10-05 22:52:29] [INFO] [SERIAL] Connection attempt #1 (remaining timeout: 14.8s)
[2025-10-05 22:52:29] [INFO] [SERIAL] Connection attempt #1 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:29] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:29] [INFO] [SERIAL] Connection attempt #2 (remaining timeout: 14.6s)
[2025-10-05 22:52:29] [INFO] [SERIAL] Connection attempt #2 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:29] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #3 (remaining timeout: 14.4s)
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #3 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:30] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #4 (remaining timeout: 14.2s)
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #4 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:30] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #5 (remaining timeout: 14.0s)
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #5 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:30] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #6 (remaining timeout: 13.8s)
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #6 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:30] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:30] [INFO] [SERIAL] Connection attempt #7 (remaining timeout: 13.6s)
[2025-10-05 22:52:30] [INFO] [SERIAL] Connected to port COM11 on attempt #7
[2025-10-05 22:52:30] [INFO] [SERIAL RX] Monitoring for ready token: 'SYSTEM READY'
[2025-10-05 22:52:33] [INFO] [SERIAL RX] Chunk #1: 393 bytes
[2025-10-05 22:52:33] [INFO] [SERIAL RX] Content: [INFO] Core 0 initializing...<CR><LF>
	[ECHO] Device Serial : SN-369366060325<CR><LF>
	[ECHO] Firmware Ver  : 1.0.0<CR><LF>
	[ECHO] Core voltage  : 1.15 V (vsel = 1)<CR><LF>
	[ECHO] Clock Sources :<CR><LF>
	[ECHO] 	SYS: 200000000 Hz (200 MHz)<CR><LF>
	[ECHO] 	USB: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	PER: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	ADC: 48000000 Hz (48 MHz)<CR><LF>
[INFO] ADC initializing<CR><LF>
VREG register: 0x000010D1<CR><LF>
[INFO] I2C scanning...<CR><LF>

[2025-10-05 22:52:33] [INFO] [SERIAL RX] Chunk #2: 64 bytes
[2025-10-05 22:52:33] [INFO] [SERIAL RX] Content: [INFO] EEPROM initializing...<CR><LF>
[INFO] MCP23017 initializing...<CR><LF>

[2025-10-05 22:52:36] [INFO] [SERIAL RX] Chunk #3: 162 bytes
[2025-10-05 22:52:36] [INFO] [SERIAL RX] Content: [INFO] Headless mode, skipping display initialization<CR><LF>
[INFO] Initializing HLW8032...<CR><LF>
[INFO] Initializing buttons...<CR><LF>
[INFO] Loaded network config from EEPROM.<CR><LF>

[2025-10-05 22:52:37] [INFO] [SERIAL RX] Chunk #4: 456 bytes
[2025-10-05 22:52:37] [INFO] [SERIAL RX] Content: [INFO] W5500 version: 0x04<CR><LF>
[INFO] W5500 PHY link is up<CR><LF>
	[ECHO] =============================================<CR><LF>
	[ECHO]  W5500 network configuration : static<CR><LF>
	[ECHO]  MAC         : 00:08:DC:BE:EF:91<CR><LF>
	[ECHO]  IP          : 192.168.0.11<CR><LF>
	[ECHO]  Subnet Mask : 255.255.255.0<CR><LF>
	[ECHO]  Gateway     : 192.168.0.1<CR><LF>
	[ECHO]  DNS         : 8.8.8.8<CR><LF>
	[ECHO] =============================================<CR><LF>
<CR><LF>
SYSTEM READY<CR><LF>
[INFO] - SNMP : Start SNMP Agent Daemon<CR><LF>

[2025-10-05 22:52:37] [INFO] [SERIAL] Ready token 'SYSTEM READY' detected!
[2025-10-05 22:52:37] [INFO] [SERIAL RX] Total response: 1075 bytes in 4 chunks
[2025-10-05 22:52:37] [INFO] [SERIAL RX] Elapsed time: 8.304s
[2025-10-05 22:52:37] [INFO] [SERIAL RX] Full response:
[2025-10-05 22:52:37] [INFO] [INFO] Core 0 initializing...\r\n
	[ECHO] Device Serial : SN-369366060325\r\n
	[ECHO] Firmware Ver  : 1.0.0\r\n
	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
	[ECHO] Clock Sources :\r\n
	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
[INFO] ADC initializing\r\n
VREG register: 0x000010D1\r\n
[INFO] I2C scanning...\r\n
[INFO] EEPROM initializing...\r\n
[INFO] MCP23017 initializing...\r\n
[INFO] Headless mode, skipping display initialization\r\n
[INFO] Initializing HLW8032...\r\n
[INFO] Initializing buttons...\r\n
[INFO] Loaded network config from EEPROM.\r\n
[INFO] W5500 version: 0x04\r\n
[INFO] W5500 PHY link is up\r\n
	[ECHO] =============================================\r\n
	[ECHO]  W5500 network configuration : static\r\n
	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
	[ECHO]  IP          : 192.168.0.11\r\n
	[ECHO]  Subnet Mask : 255.255.255.0\r\n
	[ECHO]  Gateway     : 192.168.0.1\r\n
	[ECHO]  DNS         : 8.8.8.8\r\n
	[ECHO] =============================================\r\n
\r\n
SYSTEM READY\r\n
[INFO] - SNMP : Start SNMP Agent Daemon\r\n

[2025-10-05 22:52:37] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:37] [INFO]   0000  5B 49 4E 46 4F 5D 20 43 6F 72 65 20 30 20 69 6E   |[INFO] Core 0 in|
  0010  69 74 69 61 6C 69 7A 69 6E 67 2E 2E 2E 0D 0A 09   |itializing......|
  0020  5B 45 43 48 4F 5D 20 44 65 76 69 63 65 20 53 65   |[ECHO] Device Se|
  0030  72 69 61 6C 20 3A 20 53 4E 2D 33 36 39 33 36 36   |rial : SN-369366|
  0040  30 36 30 33 32 35 0D 0A 09 5B 45 43 48 4F 5D 20   |060325...[ECHO] |
  0050  46 69 72 6D 77 61 72 65 20 56 65 72 20 20 3A 20   |Firmware Ver  : |
  0060  31 2E 30 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 43   |1.0.0...[ECHO] C|
  0070  6F 72 65 20 76 6F 6C 74 61 67 65 20 20 3A 20 31   |ore voltage  : 1|
  0080  2E 31 35 20 56 20 28 76 73 65 6C 20 3D 20 31 29   |.15 V (vsel = 1)|
  0090  0D 0A 09 5B 45 43 48 4F 5D 20 43 6C 6F 63 6B 20   |...[ECHO] Clock |
  00A0  53 6F 75 72 63 65 73 20 3A 0D 0A 09 5B 45 43 48   |Sources :...[ECH|
  00B0  4F 5D 20 09 53 59 53 3A 20 32 30 30 30 30 30 30   |O] .SYS: 2000000|
  00C0  30 30 20 48 7A 20 28 32 30 30 20 4D 48 7A 29 0D   |00 Hz (200 MHz).|
  00D0  0A 09 5B 45 43 48 4F 5D 20 09 55 53 42 3A 20 34   |..[ECHO] .USB: 4|
  00E0  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  00F0  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 50 45   |Hz)...[ECHO] .PE|
  0100  52 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |R: 48000000 Hz (|
  0110  34 38 20 4D 48 7A 29 0D 0A 09 5B 45 43 48 4F 5D   |48 MHz)...[ECHO]|
  0120  20 09 41 44 43 3A 20 34 38 30 30 30 30 30 30 20   | .ADC: 48000000 |
  0130  48 7A 20 28 34 38 20 4D 48 7A 29 0D 0A 5B 49 4E   |Hz (48 MHz)..[IN|
  0140  46 4F 5D 20 41 44 43 20 69 6E 69 74 69 61 6C 69   |FO] ADC initiali|
  0150  7A 69 6E 67 0D 0A 56 52 45 47 20 72 65 67 69 73   |zing..VREG regis|
  0160  74 65 72 3A 20 30 78 30 30 30 30 31 30 44 31 0D   |ter: 0x000010D1.|
  0170  0A 5B 49 4E 46 4F 5D 20 49 32 43 20 73 63 61 6E   |.[INFO] I2C scan|
  0180  6E 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |ning.....[INFO] |
  0190  45 45 50 52 4F 4D 20 69 6E 69 74 69 61 6C 69 7A   |EEPROM initializ|
  01A0  69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20 4D   |ing.....[INFO] M|
  01B0  43 50 32 33 30 31 37 20 69 6E 69 74 69 61 6C 69   |CP23017 initiali|
  01C0  7A 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |zing.....[INFO] |
  01D0  48 65 61 64 6C 65 73 73 20 6D 6F 64 65 2C 20 73   |Headless mode, s|
  01E0  6B 69 70 70 69 6E 67 20 64 69 73 70 6C 61 79 20   |kipping display |
  01F0  69 6E 69 74 69 61 6C 69 7A 61 74 69 6F 6E 0D 0A   |initialization..|
  0200  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0210  69 6E 67 20 48 4C 57 38 30 33 32 2E 2E 2E 0D 0A   |ing HLW8032.....|
  0220  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0230  69 6E 67 20 62 75 74 74 6F 6E 73 2E 2E 2E 0D 0A   |ing buttons.....|
  0240  5B 49 4E 46 4F 5D 20 4C 6F 61 64 65 64 20 6E 65   |[INFO] Loaded ne|
  0250  74 77 6F 72 6B 20 63 6F 6E 66 69 67 20 66 72 6F   |twork config fro|
  0260  6D 20 45 45 50 52 4F 4D 2E 0D 0A 5B 49 4E 46 4F   |m EEPROM...[INFO|
  0270  5D 20 57 35 35 30 30 20 76 65 72 73 69 6F 6E 3A   |] W5500 version:|
  0280  20 30 78 30 34 0D 0A 5B 49 4E 46 4F 5D 20 57 35   | 0x04..[INFO] W5|
  0290  35 30 30 20 50 48 59 20 6C 69 6E 6B 20 69 73 20   |500 PHY link is |
  02A0  75 70 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D   |up...[ECHO] ====|
  02B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 09 5B 45 43 48   |=========...[ECH|
  02E0  4F 5D 20 20 57 35 35 30 30 20 6E 65 74 77 6F 72   |O]  W5500 networ|
  02F0  6B 20 63 6F 6E 66 69 67 75 72 61 74 69 6F 6E 20   |k configuration |
  0300  3A 20 73 74 61 74 69 63 0D 0A 09 5B 45 43 48 4F   |: static...[ECHO|
  0310  5D 20 20 4D 41 43 20 20 20 20 20 20 20 20 20 3A   |]  MAC         :|
  0320  20 30 30 3A 30 38 3A 44 43 3A 42 45 3A 45 46 3A   | 00:08:DC:BE:EF:|
  0330  39 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 49 50 20   |91...[ECHO]  IP |
  0340  20 20 20 20 20 20 20 20 20 3A 20 31 39 32 2E 31   |         : 192.1|
  0350  36 38 2E 30 2E 31 31 0D 0A 09 5B 45 43 48 4F 5D   |68.0.11...[ECHO]|
  0360  20 20 53 75 62 6E 65 74 20 4D 61 73 6B 20 3A 20   |  Subnet Mask : |
  0370  32 35 35 2E 32 35 35 2E 32 35 35 2E 30 0D 0A 09   |255.255.255.0...|
  0380  5B 45 43 48 4F 5D 20 20 47 61 74 65 77 61 79 20   |[ECHO]  Gateway |
  0390  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 30 2E   |    : 192.168.0.|
  03A0  31 0D 0A 09 5B 45 43 48 4F 5D 20 20 44 4E 53 20   |1...[ECHO]  DNS |
  03B0  20 20 20 20 20 20 20 20 3A 20 38 2E 38 2E 38 2E   |        : 8.8.8.|
  03C0  38 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D   |8...[ECHO] =====|
  03D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03F0  3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 0D 0A 53 59 53 54   |========....SYST|
  0400  45 4D 20 52 45 41 44 59 0D 0A 5B 49 4E 46 4F 5D   |EM READY..[INFO]|
  0410  20 2D 20 53 4E 4D 50 20 3A 20 53 74 61 72 74 20   | - SNMP : Start |
  0420  53 4E 4D 50 20 41 67 65 6E 74 20 44 61 65 6D 6F   |SNMP Agent Daemo|
  0430  6E 0D 0A                                          |n..|
[2025-10-05 22:52:37] [INFO] [SERIAL] Device ready! Returning True
[2025-10-05 22:52:37] [INFO] [SERIAL] Closed port COM11
[2025-10-05 22:52:37] [PASS] STEP 7.3 completed successfully

STEP 7.4 Verify ready after reboot 2

PASS

Started	Finished
2025-10-05 22:52:37	2025-10-05 22:52:38

Log

[2025-10-05 22:52:37] [STEP 7.4] Verify ready after reboot 2
[2025-10-05 22:52:37] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:37] [INFO] [SERIAL]   port=COM11, command='NETINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:37] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:37] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:37] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:37] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:37] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:37] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:37] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:37] [INFO] [SERIAL TX] Sending command: 'NETINFO'
[2025-10-05 22:52:37] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:52:37] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:37] [INFO]   0000  4E 45 54 49 4E 46 4F 0D 0A                        |NETINFO..|
[2025-10-05 22:52:37] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:52:37] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:37] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:37] [INFO] [SERIAL RX] Chunk #1: received 93 bytes (elapsed: 0.011s, total: 93 bytes)
[2025-10-05 22:52:38] [INFO] [SERIAL RX] Chunk #2: received 407 bytes (elapsed: 0.339s, total: 500 bytes)
[2025-10-05 22:52:38] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:52:38] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:52:38] [INFO] [SERIAL RX]   Total bytes: 500
[2025-10-05 22:52:38] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:52:38] [INFO] [SERIAL RX]   Total time: 0.842s
[2025-10-05 22:52:38] [INFO] [SERIAL RX] Decoded text (500 characters):
[2025-10-05 22:52:38] [INFO]   [INFO] HTTP server listening on port 80\r\n
  [INFO] - [1] UDP Socket for SNMP Agent, port [161]\r\n
  	[ECHO] Received CMD: "NETINFO"\r\n
  	[ECHO] NETWORK INFORMATION:\r\n
  	[ECHO] =============================================\r\n
  	[ECHO]  W5500 network configuration : static\r\n
  	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
  	[ECHO]  IP          : 192.168.0.11\r\n
  	[ECHO]  Subnet Mask : 255.255.255.0\r\n
  	[ECHO]  Gateway     : 192.168.0.1\r\n
  	[ECHO]  DNS         : 8.8.8.8\r\n
  	[ECHO] =============================================\r\n
  \r\n
  
[2025-10-05 22:52:38] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:38] [INFO]   0000  5B 49 4E 46 4F 5D 20 48 54 54 50 20 73 65 72 76   |[INFO] HTTP serv|
  0010  65 72 20 6C 69 73 74 65 6E 69 6E 67 20 6F 6E 20   |er listening on |
  0020  70 6F 72 74 20 38 30 0D 0A 5B 49 4E 46 4F 5D 20   |port 80..[INFO] |
  0030  2D 20 5B 31 5D 20 55 44 50 20 53 6F 63 6B 65 74   |- [1] UDP Socket|
  0040  20 66 6F 72 20 53 4E 4D 50 20 41 67 65 6E 74 2C   | for SNMP Agent,|
  0050  20 70 6F 72 74 20 5B 31 36 31 5D 0D 0A 09 5B 45   | port [161]...[E|
  0060  43 48 4F 5D 20 52 65 63 65 69 76 65 64 20 43 4D   |CHO] Received CM|
  0070  44 3A 20 22 4E 45 54 49 4E 46 4F 22 0D 0A 09 5B   |D: "NETINFO"...[|
  0080  45 43 48 4F 5D 20 4E 45 54 57 4F 52 4B 20 49 4E   |ECHO] NETWORK IN|
  0090  46 4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09 5B 45 43   |FORMATION:...[EC|
  00A0  48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |HO] ============|
  00B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00D0  3D 0D 0A 09 5B 45 43 48 4F 5D 20 20 57 35 35 30   |=...[ECHO]  W550|
  00E0  30 20 6E 65 74 77 6F 72 6B 20 63 6F 6E 66 69 67   |0 network config|
  00F0  75 72 61 74 69 6F 6E 20 3A 20 73 74 61 74 69 63   |uration : static|
  0100  0D 0A 09 5B 45 43 48 4F 5D 20 20 4D 41 43 20 20   |...[ECHO]  MAC  |
  0110  20 20 20 20 20 20 20 3A 20 30 30 3A 30 38 3A 44   |       : 00:08:D|
  0120  43 3A 42 45 3A 45 46 3A 39 31 0D 0A 09 5B 45 43   |C:BE:EF:91...[EC|
  0130  48 4F 5D 20 20 49 50 20 20 20 20 20 20 20 20 20   |HO]  IP         |
  0140  20 3A 20 31 39 32 2E 31 36 38 2E 30 2E 31 31 0D   | : 192.168.0.11.|
  0150  0A 09 5B 45 43 48 4F 5D 20 20 53 75 62 6E 65 74   |..[ECHO]  Subnet|
  0160  20 4D 61 73 6B 20 3A 20 32 35 35 2E 32 35 35 2E   | Mask : 255.255.|
  0170  32 35 35 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 20   |255.0...[ECHO]  |
  0180  47 61 74 65 77 61 79 20 20 20 20 20 3A 20 31 39   |Gateway     : 19|
  0190  32 2E 31 36 38 2E 30 2E 31 0D 0A 09 5B 45 43 48   |2.168.0.1...[ECH|
  01A0  4F 5D 20 20 44 4E 53 20 20 20 20 20 20 20 20 20   |O]  DNS         |
  01B0  3A 20 38 2E 38 2E 38 2E 38 0D 0A 09 5B 45 43 48   |: 8.8.8.8...[ECH|
  01C0  4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |O] =============|
  01D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01F0  0D 0A 0D 0A                                       |....|
[2025-10-05 22:52:38] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:38] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:38] [PASS] STEP 7.4 completed successfully

STEP 7.5 Reboot cycle 3

PASS

Started	Finished
2025-10-05 22:52:38	2025-10-05 22:52:47

Log

[2025-10-05 22:52:38] [STEP 7.5] Reboot cycle 3
[2025-10-05 22:52:38] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:38] [INFO] [SERIAL]   port=COM11, command='REBOOT', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:38] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:38] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:38] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:38] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:38] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:38] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:38] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:38] [INFO] [SERIAL TX] Sending command: 'REBOOT'
[2025-10-05 22:52:38] [INFO] [SERIAL TX] Payload length: 8 bytes (including CR+LF)
[2025-10-05 22:52:38] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:38] [INFO]   0000  52 45 42 4F 4F 54 0D 0A                           |REBOOT..|
[2025-10-05 22:52:38] [INFO] [SERIAL TX] Wrote 8 bytes to port
[2025-10-05 22:52:38] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:38] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:39] [INFO] [SERIAL RX] Chunk #1: received 32 bytes (elapsed: 0.204s, total: 32 bytes)
[2025-10-05 22:52:39] [ERROR] [SERIAL ERROR] Exception during send_command:
[2025-10-05 22:52:39] [ERROR] [SERIAL ERROR]   Type: SerialException
[2025-10-05 22:52:39] [ERROR] [SERIAL ERROR]   Message: ClearCommError failed (PermissionError(13, 'The device does not recognize the command.', None, 22))
[2025-10-05 22:52:39] [ERROR] [SERIAL ERROR]   Port: COM11, Command: 'REBOOT'
[2025-10-05 22:52:39] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:39] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:39] [INFO] [SERIAL] wait_for_reboot_and_ready() called
[2025-10-05 22:52:39] [INFO] [SERIAL]   port=COM11, ready_token='SYSTEM READY', baudrate=115200, timeout=15.0s
[2025-10-05 22:52:39] [INFO] [SERIAL] Waiting 200ms for device to start rebooting...
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #1 (remaining timeout: 14.8s)
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #1 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:39] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #2 (remaining timeout: 14.6s)
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #2 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:39] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #3 (remaining timeout: 14.4s)
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #3 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:39] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #4 (remaining timeout: 14.2s)
[2025-10-05 22:52:39] [INFO] [SERIAL] Connection attempt #4 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:39] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:40] [INFO] [SERIAL] Connection attempt #5 (remaining timeout: 14.0s)
[2025-10-05 22:52:40] [INFO] [SERIAL] Connection attempt #5 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:40] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:40] [INFO] [SERIAL] Connection attempt #6 (remaining timeout: 13.8s)
[2025-10-05 22:52:40] [INFO] [SERIAL] Connection attempt #6 failed: SerialException: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
[2025-10-05 22:52:40] [INFO] [SERIAL] Waiting 200ms before next attempt...
[2025-10-05 22:52:40] [INFO] [SERIAL] Connection attempt #7 (remaining timeout: 13.6s)
[2025-10-05 22:52:40] [INFO] [SERIAL] Connected to port COM11 on attempt #7
[2025-10-05 22:52:40] [INFO] [SERIAL RX] Monitoring for ready token: 'SYSTEM READY'
[2025-10-05 22:52:43] [INFO] [SERIAL RX] Chunk #1: 393 bytes
[2025-10-05 22:52:43] [INFO] [SERIAL RX] Content: [INFO] Core 0 initializing...<CR><LF>
	[ECHO] Device Serial : SN-369366060325<CR><LF>
	[ECHO] Firmware Ver  : 1.0.0<CR><LF>
	[ECHO] Core voltage  : 1.15 V (vsel = 1)<CR><LF>
	[ECHO] Clock Sources :<CR><LF>
	[ECHO] 	SYS: 200000000 Hz (200 MHz)<CR><LF>
	[ECHO] 	USB: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	PER: 48000000 Hz (48 MHz)<CR><LF>
	[ECHO] 	ADC: 48000000 Hz (48 MHz)<CR><LF>
[INFO] ADC initializing<CR><LF>
VREG register: 0x000010D1<CR><LF>
[INFO] I2C scanning...<CR><LF>

[2025-10-05 22:52:43] [INFO] [SERIAL RX] Chunk #2: 64 bytes
[2025-10-05 22:52:43] [INFO] [SERIAL RX] Content: [INFO] EEPROM initializing...<CR><LF>
[INFO] MCP23017 initializing...<CR><LF>

[2025-10-05 22:52:45] [INFO] [SERIAL RX] Chunk #3: 162 bytes
[2025-10-05 22:52:45] [INFO] [SERIAL RX] Content: [INFO] Headless mode, skipping display initialization<CR><LF>
[INFO] Initializing HLW8032...<CR><LF>
[INFO] Initializing buttons...<CR><LF>
[INFO] Loaded network config from EEPROM.<CR><LF>

[2025-10-05 22:52:47] [INFO] [SERIAL RX] Chunk #4: 456 bytes
[2025-10-05 22:52:47] [INFO] [SERIAL RX] Content: [INFO] W5500 version: 0x04<CR><LF>
[INFO] W5500 PHY link is up<CR><LF>
	[ECHO] =============================================<CR><LF>
	[ECHO]  W5500 network configuration : static<CR><LF>
	[ECHO]  MAC         : 00:08:DC:BE:EF:91<CR><LF>
	[ECHO]  IP          : 192.168.0.11<CR><LF>
	[ECHO]  Subnet Mask : 255.255.255.0<CR><LF>
	[ECHO]  Gateway     : 192.168.0.1<CR><LF>
	[ECHO]  DNS         : 8.8.8.8<CR><LF>
	[ECHO] =============================================<CR><LF>
<CR><LF>
SYSTEM READY<CR><LF>
[INFO] - SNMP : Start SNMP Agent Daemon<CR><LF>

[2025-10-05 22:52:47] [INFO] [SERIAL] Ready token 'SYSTEM READY' detected!
[2025-10-05 22:52:47] [INFO] [SERIAL RX] Total response: 1075 bytes in 4 chunks
[2025-10-05 22:52:47] [INFO] [SERIAL RX] Elapsed time: 8.299s
[2025-10-05 22:52:47] [INFO] [SERIAL RX] Full response:
[2025-10-05 22:52:47] [INFO] [INFO] Core 0 initializing...\r\n
	[ECHO] Device Serial : SN-369366060325\r\n
	[ECHO] Firmware Ver  : 1.0.0\r\n
	[ECHO] Core voltage  : 1.15 V (vsel = 1)\r\n
	[ECHO] Clock Sources :\r\n
	[ECHO] 	SYS: 200000000 Hz (200 MHz)\r\n
	[ECHO] 	USB: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	PER: 48000000 Hz (48 MHz)\r\n
	[ECHO] 	ADC: 48000000 Hz (48 MHz)\r\n
[INFO] ADC initializing\r\n
VREG register: 0x000010D1\r\n
[INFO] I2C scanning...\r\n
[INFO] EEPROM initializing...\r\n
[INFO] MCP23017 initializing...\r\n
[INFO] Headless mode, skipping display initialization\r\n
[INFO] Initializing HLW8032...\r\n
[INFO] Initializing buttons...\r\n
[INFO] Loaded network config from EEPROM.\r\n
[INFO] W5500 version: 0x04\r\n
[INFO] W5500 PHY link is up\r\n
	[ECHO] =============================================\r\n
	[ECHO]  W5500 network configuration : static\r\n
	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
	[ECHO]  IP          : 192.168.0.11\r\n
	[ECHO]  Subnet Mask : 255.255.255.0\r\n
	[ECHO]  Gateway     : 192.168.0.1\r\n
	[ECHO]  DNS         : 8.8.8.8\r\n
	[ECHO] =============================================\r\n
\r\n
SYSTEM READY\r\n
[INFO] - SNMP : Start SNMP Agent Daemon\r\n

[2025-10-05 22:52:47] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:47] [INFO]   0000  5B 49 4E 46 4F 5D 20 43 6F 72 65 20 30 20 69 6E   |[INFO] Core 0 in|
  0010  69 74 69 61 6C 69 7A 69 6E 67 2E 2E 2E 0D 0A 09   |itializing......|
  0020  5B 45 43 48 4F 5D 20 44 65 76 69 63 65 20 53 65   |[ECHO] Device Se|
  0030  72 69 61 6C 20 3A 20 53 4E 2D 33 36 39 33 36 36   |rial : SN-369366|
  0040  30 36 30 33 32 35 0D 0A 09 5B 45 43 48 4F 5D 20   |060325...[ECHO] |
  0050  46 69 72 6D 77 61 72 65 20 56 65 72 20 20 3A 20   |Firmware Ver  : |
  0060  31 2E 30 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 43   |1.0.0...[ECHO] C|
  0070  6F 72 65 20 76 6F 6C 74 61 67 65 20 20 3A 20 31   |ore voltage  : 1|
  0080  2E 31 35 20 56 20 28 76 73 65 6C 20 3D 20 31 29   |.15 V (vsel = 1)|
  0090  0D 0A 09 5B 45 43 48 4F 5D 20 43 6C 6F 63 6B 20   |...[ECHO] Clock |
  00A0  53 6F 75 72 63 65 73 20 3A 0D 0A 09 5B 45 43 48   |Sources :...[ECH|
  00B0  4F 5D 20 09 53 59 53 3A 20 32 30 30 30 30 30 30   |O] .SYS: 2000000|
  00C0  30 30 20 48 7A 20 28 32 30 30 20 4D 48 7A 29 0D   |00 Hz (200 MHz).|
  00D0  0A 09 5B 45 43 48 4F 5D 20 09 55 53 42 3A 20 34   |..[ECHO] .USB: 4|
  00E0  38 30 30 30 30 30 30 20 48 7A 20 28 34 38 20 4D   |8000000 Hz (48 M|
  00F0  48 7A 29 0D 0A 09 5B 45 43 48 4F 5D 20 09 50 45   |Hz)...[ECHO] .PE|
  0100  52 3A 20 34 38 30 30 30 30 30 30 20 48 7A 20 28   |R: 48000000 Hz (|
  0110  34 38 20 4D 48 7A 29 0D 0A 09 5B 45 43 48 4F 5D   |48 MHz)...[ECHO]|
  0120  20 09 41 44 43 3A 20 34 38 30 30 30 30 30 30 20   | .ADC: 48000000 |
  0130  48 7A 20 28 34 38 20 4D 48 7A 29 0D 0A 5B 49 4E   |Hz (48 MHz)..[IN|
  0140  46 4F 5D 20 41 44 43 20 69 6E 69 74 69 61 6C 69   |FO] ADC initiali|
  0150  7A 69 6E 67 0D 0A 56 52 45 47 20 72 65 67 69 73   |zing..VREG regis|
  0160  74 65 72 3A 20 30 78 30 30 30 30 31 30 44 31 0D   |ter: 0x000010D1.|
  0170  0A 5B 49 4E 46 4F 5D 20 49 32 43 20 73 63 61 6E   |.[INFO] I2C scan|
  0180  6E 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |ning.....[INFO] |
  0190  45 45 50 52 4F 4D 20 69 6E 69 74 69 61 6C 69 7A   |EEPROM initializ|
  01A0  69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20 4D   |ing.....[INFO] M|
  01B0  43 50 32 33 30 31 37 20 69 6E 69 74 69 61 6C 69   |CP23017 initiali|
  01C0  7A 69 6E 67 2E 2E 2E 0D 0A 5B 49 4E 46 4F 5D 20   |zing.....[INFO] |
  01D0  48 65 61 64 6C 65 73 73 20 6D 6F 64 65 2C 20 73   |Headless mode, s|
  01E0  6B 69 70 70 69 6E 67 20 64 69 73 70 6C 61 79 20   |kipping display |
  01F0  69 6E 69 74 69 61 6C 69 7A 61 74 69 6F 6E 0D 0A   |initialization..|
  0200  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0210  69 6E 67 20 48 4C 57 38 30 33 32 2E 2E 2E 0D 0A   |ing HLW8032.....|
  0220  5B 49 4E 46 4F 5D 20 49 6E 69 74 69 61 6C 69 7A   |[INFO] Initializ|
  0230  69 6E 67 20 62 75 74 74 6F 6E 73 2E 2E 2E 0D 0A   |ing buttons.....|
  0240  5B 49 4E 46 4F 5D 20 4C 6F 61 64 65 64 20 6E 65   |[INFO] Loaded ne|
  0250  74 77 6F 72 6B 20 63 6F 6E 66 69 67 20 66 72 6F   |twork config fro|
  0260  6D 20 45 45 50 52 4F 4D 2E 0D 0A 5B 49 4E 46 4F   |m EEPROM...[INFO|
  0270  5D 20 57 35 35 30 30 20 76 65 72 73 69 6F 6E 3A   |] W5500 version:|
  0280  20 30 78 30 34 0D 0A 5B 49 4E 46 4F 5D 20 57 35   | 0x04..[INFO] W5|
  0290  35 30 30 20 50 48 59 20 6C 69 6E 6B 20 69 73 20   |500 PHY link is |
  02A0  75 70 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D   |up...[ECHO] ====|
  02B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  02D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 09 5B 45 43 48   |=========...[ECH|
  02E0  4F 5D 20 20 57 35 35 30 30 20 6E 65 74 77 6F 72   |O]  W5500 networ|
  02F0  6B 20 63 6F 6E 66 69 67 75 72 61 74 69 6F 6E 20   |k configuration |
  0300  3A 20 73 74 61 74 69 63 0D 0A 09 5B 45 43 48 4F   |: static...[ECHO|
  0310  5D 20 20 4D 41 43 20 20 20 20 20 20 20 20 20 3A   |]  MAC         :|
  0320  20 30 30 3A 30 38 3A 44 43 3A 42 45 3A 45 46 3A   | 00:08:DC:BE:EF:|
  0330  39 31 0D 0A 09 5B 45 43 48 4F 5D 20 20 49 50 20   |91...[ECHO]  IP |
  0340  20 20 20 20 20 20 20 20 20 3A 20 31 39 32 2E 31   |         : 192.1|
  0350  36 38 2E 30 2E 31 31 0D 0A 09 5B 45 43 48 4F 5D   |68.0.11...[ECHO]|
  0360  20 20 53 75 62 6E 65 74 20 4D 61 73 6B 20 3A 20   |  Subnet Mask : |
  0370  32 35 35 2E 32 35 35 2E 32 35 35 2E 30 0D 0A 09   |255.255.255.0...|
  0380  5B 45 43 48 4F 5D 20 20 47 61 74 65 77 61 79 20   |[ECHO]  Gateway |
  0390  20 20 20 20 3A 20 31 39 32 2E 31 36 38 2E 30 2E   |    : 192.168.0.|
  03A0  31 0D 0A 09 5B 45 43 48 4F 5D 20 20 44 4E 53 20   |1...[ECHO]  DNS |
  03B0  20 20 20 20 20 20 20 20 3A 20 38 2E 38 2E 38 2E   |        : 8.8.8.|
  03C0  38 0D 0A 09 5B 45 43 48 4F 5D 20 3D 3D 3D 3D 3D   |8...[ECHO] =====|
  03D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  03F0  3D 3D 3D 3D 3D 3D 3D 3D 0D 0A 0D 0A 53 59 53 54   |========....SYST|
  0400  45 4D 20 52 45 41 44 59 0D 0A 5B 49 4E 46 4F 5D   |EM READY..[INFO]|
  0410  20 2D 20 53 4E 4D 50 20 3A 20 53 74 61 72 74 20   | - SNMP : Start |
  0420  53 4E 4D 50 20 41 67 65 6E 74 20 44 61 65 6D 6F   |SNMP Agent Daemo|
  0430  6E 0D 0A                                          |n..|
[2025-10-05 22:52:47] [INFO] [SERIAL] Device ready! Returning True
[2025-10-05 22:52:47] [INFO] [SERIAL] Closed port COM11
[2025-10-05 22:52:47] [PASS] STEP 7.5 completed successfully

STEP 7.6 Verify ready after reboot 3

PASS

Started	Finished
2025-10-05 22:52:47	2025-10-05 22:52:48

Log

[2025-10-05 22:52:47] [STEP 7.6] Verify ready after reboot 3
[2025-10-05 22:52:47] [INFO] [SERIAL] send_command() called
[2025-10-05 22:52:47] [INFO] [SERIAL]   port=COM11, command='NETINFO', baudrate=115200, timeout=2.0s
[2025-10-05 22:52:47] [INFO] [SERIAL] Opening connection to port=COM11
[2025-10-05 22:52:47] [INFO] [SERIAL]   Configuration: baudrate=115200, timeout=2.0s, write_timeout=2.0s
[2025-10-05 22:52:47] [INFO] [SERIAL]   Flow control: xonxoff=False, rtscts=False, dsrdtr=False
[2025-10-05 22:52:47] [INFO] [SERIAL] Port COM11 opened successfully
[2025-10-05 22:52:47] [INFO] [SERIAL] Stabilizing connection (100ms delay)...
[2025-10-05 22:52:47] [INFO] [SERIAL] Resetting input and output buffers
[2025-10-05 22:52:47] [INFO] [SERIAL] Connection ready: port=COM11, baudrate=115200, timeout=2.0s
[2025-10-05 22:52:47] [INFO] [SERIAL TX] Sending command: 'NETINFO'
[2025-10-05 22:52:47] [INFO] [SERIAL TX] Payload length: 9 bytes (including CR+LF)
[2025-10-05 22:52:47] [INFO] [SERIAL TX] Hex dump:
[2025-10-05 22:52:47] [INFO]   0000  4E 45 54 49 4E 46 4F 0D 0A                        |NETINFO..|
[2025-10-05 22:52:47] [INFO] [SERIAL TX] Wrote 9 bytes to port
[2025-10-05 22:52:47] [INFO] [SERIAL TX] Waiting 50ms for device processing...
[2025-10-05 22:52:47] [INFO] [SERIAL RX] Starting to read response (timeout=2.0s)
[2025-10-05 22:52:47] [INFO] [SERIAL RX] Chunk #1: received 93 bytes (elapsed: 0.021s, total: 93 bytes)
[2025-10-05 22:52:47] [INFO] [SERIAL RX] Chunk #2: received 407 bytes (elapsed: 0.347s, total: 500 bytes)
[2025-10-05 22:52:48] [INFO] [SERIAL RX] No data received for 500ms, assuming response complete
[2025-10-05 22:52:48] [INFO] [SERIAL RX] Response complete:
[2025-10-05 22:52:48] [INFO] [SERIAL RX]   Total bytes: 500
[2025-10-05 22:52:48] [INFO] [SERIAL RX]   Chunks received: 2
[2025-10-05 22:52:48] [INFO] [SERIAL RX]   Total time: 0.847s
[2025-10-05 22:52:48] [INFO] [SERIAL RX] Decoded text (500 characters):
[2025-10-05 22:52:48] [INFO]   [INFO] HTTP server listening on port 80\r\n
  [INFO] - [1] UDP Socket for SNMP Agent, port [161]\r\n
  	[ECHO] Received CMD: "NETINFO"\r\n
  	[ECHO] NETWORK INFORMATION:\r\n
  	[ECHO] =============================================\r\n
  	[ECHO]  W5500 network configuration : static\r\n
  	[ECHO]  MAC         : 00:08:DC:BE:EF:91\r\n
  	[ECHO]  IP          : 192.168.0.11\r\n
  	[ECHO]  Subnet Mask : 255.255.255.0\r\n
  	[ECHO]  Gateway     : 192.168.0.1\r\n
  	[ECHO]  DNS         : 8.8.8.8\r\n
  	[ECHO] =============================================\r\n
  \r\n
  
[2025-10-05 22:52:48] [INFO] [SERIAL RX] Hex dump:
[2025-10-05 22:52:48] [INFO]   0000  5B 49 4E 46 4F 5D 20 48 54 54 50 20 73 65 72 76   |[INFO] HTTP serv|
  0010  65 72 20 6C 69 73 74 65 6E 69 6E 67 20 6F 6E 20   |er listening on |
  0020  70 6F 72 74 20 38 30 0D 0A 5B 49 4E 46 4F 5D 20   |port 80..[INFO] |
  0030  2D 20 5B 31 5D 20 55 44 50 20 53 6F 63 6B 65 74   |- [1] UDP Socket|
  0040  20 66 6F 72 20 53 4E 4D 50 20 41 67 65 6E 74 2C   | for SNMP Agent,|
  0050  20 70 6F 72 74 20 5B 31 36 31 5D 0D 0A 09 5B 45   | port [161]...[E|
  0060  43 48 4F 5D 20 52 65 63 65 69 76 65 64 20 43 4D   |CHO] Received CM|
  0070  44 3A 20 22 4E 45 54 49 4E 46 4F 22 0D 0A 09 5B   |D: "NETINFO"...[|
  0080  45 43 48 4F 5D 20 4E 45 54 57 4F 52 4B 20 49 4E   |ECHO] NETWORK IN|
  0090  46 4F 52 4D 41 54 49 4F 4E 3A 0D 0A 09 5B 45 43   |FORMATION:...[EC|
  00A0  48 4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |HO] ============|
  00B0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00C0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  00D0  3D 0D 0A 09 5B 45 43 48 4F 5D 20 20 57 35 35 30   |=...[ECHO]  W550|
  00E0  30 20 6E 65 74 77 6F 72 6B 20 63 6F 6E 66 69 67   |0 network config|
  00F0  75 72 61 74 69 6F 6E 20 3A 20 73 74 61 74 69 63   |uration : static|
  0100  0D 0A 09 5B 45 43 48 4F 5D 20 20 4D 41 43 20 20   |...[ECHO]  MAC  |
  0110  20 20 20 20 20 20 20 3A 20 30 30 3A 30 38 3A 44   |       : 00:08:D|
  0120  43 3A 42 45 3A 45 46 3A 39 31 0D 0A 09 5B 45 43   |C:BE:EF:91...[EC|
  0130  48 4F 5D 20 20 49 50 20 20 20 20 20 20 20 20 20   |HO]  IP         |
  0140  20 3A 20 31 39 32 2E 31 36 38 2E 30 2E 31 31 0D   | : 192.168.0.11.|
  0150  0A 09 5B 45 43 48 4F 5D 20 20 53 75 62 6E 65 74   |..[ECHO]  Subnet|
  0160  20 4D 61 73 6B 20 3A 20 32 35 35 2E 32 35 35 2E   | Mask : 255.255.|
  0170  32 35 35 2E 30 0D 0A 09 5B 45 43 48 4F 5D 20 20   |255.0...[ECHO]  |
  0180  47 61 74 65 77 61 79 20 20 20 20 20 3A 20 31 39   |Gateway     : 19|
  0190  32 2E 31 36 38 2E 30 2E 31 0D 0A 09 5B 45 43 48   |2.168.0.1...[ECH|
  01A0  4F 5D 20 20 44 4E 53 20 20 20 20 20 20 20 20 20   |O]  DNS         |
  01B0  3A 20 38 2E 38 2E 38 2E 38 0D 0A 09 5B 45 43 48   |: 8.8.8.8...[ECH|
  01C0  4F 5D 20 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |O] =============|
  01D0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01E0  3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D 3D   |================|
  01F0  0D 0A 0D 0A                                       |....|
[2025-10-05 22:52:48] [INFO] [SERIAL] Closing port COM11
[2025-10-05 22:52:48] [INFO] [SERIAL] Port COM11 closed successfully
[2025-10-05 22:52:48] [PASS] STEP 7.6 completed successfully

STEP 7.7 Verify config stable after multiple reboots

PASS

Started	Finished
2025-10-05 22:52:48	2025-10-05 22:52:48

Log

[2025-10-05 22:52:48] [STEP 7.7] Verify config stable after multiple reboots
[2025-10-05 22:52:48] [PASS] STEP 7.7 completed successfully

STEP 8 Final EEPROM dump and analysis

PASS

Started	Finished
2025-10-05 22:52:48	2025-10-05 22:53:07

Substeps

STEP 8.1 Analyze EEPROM dump after all tests

PASS

Started	Finished
2025-10-05 22:52:48	2025-10-05 22:53:07

Log

[2025-10-05 22:52:48] [STEP 8.1] Analyze EEPROM dump after all tests
[2025-10-05 22:53:07] [PASS] STEP 8.1 completed successfully

TEARDOWN 1 Ensure all outputs OFF

PASS

Started	Finished
2025-10-05 22:53:07	2025-10-05 22:53:07

Step Log

DETAIL

Log

[2025-10-05 22:53:07] [TEARDOWN 1] Ensure all outputs OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Executing set_all_outlets: state=OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Using trigger OID: 1.3.6.1.4.1.19865.2.9.0
[2025-10-05 22:53:07] [INFO] [SNMP] set_integer() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.9.0, Value: 1, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpset -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.9.0 i 1
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.9.0 = INTEGER: 1

[2025-10-05 22:53:07] [INFO] [SNMP] snmpset returned: rc=0, success=True
[2025-10-05 22:53:07] [INFO] [SNMP SET] 192.168.0.11 1.3.6.1.4.1.19865.2.9.0 = 1 -> OK (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] Successfully set ALL outlets OFF
[2025-10-05 22:53:07] [PASS] TEARDOWN 1 completed successfully

TEARDOWN 2 Final verify all outputs OFF

PASS

Started	Finished
2025-10-05 22:53:07	2025-10-05 22:53:08

Step Log

DETAIL

Log

[2025-10-05 22:53:07] [TEARDOWN 2] Final verify all outputs OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Executing verify_all_outlets: expected_state=OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 1...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.1.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.1.0
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.1.0 = INTEGER: 0

[2025-10-05 22:53:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:07] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.1.0 -> '0' (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] CH1 state: OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 2...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.2.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.2.0
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.2.0 = INTEGER: 0

[2025-10-05 22:53:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:07] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.2.0 -> '0' (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] CH2 state: OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 3...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.3.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.3.0
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.3.0 = INTEGER: 0

[2025-10-05 22:53:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:07] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.3.0 -> '0' (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] CH3 state: OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 4...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.4.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.4.0
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.4.0 = INTEGER: 0

[2025-10-05 22:53:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:07] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.4.0 -> '0' (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] CH4 state: OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 5...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.5.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.5.0
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.5.0 = INTEGER: 0

[2025-10-05 22:53:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:07] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.5.0 -> '0' (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] CH5 state: OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 6...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.6.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.6.0
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.6.0 = INTEGER: 0

[2025-10-05 22:53:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:07] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.6.0 -> '0' (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] CH6 state: OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 7...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.7.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:07] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.7.0
[2025-10-05 22:53:07] [INFO] [SNMP] rc=0
[2025-10-05 22:53:07] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.7.0 = INTEGER: 0

[2025-10-05 22:53:07] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:07] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:07] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:07] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.7.0 -> '0' (v1/public)
[2025-10-05 22:53:07] [INFO] [SNMP] CH7 state: OFF
[2025-10-05 22:53:07] [INFO] [SNMP] Checking channel 8...
[2025-10-05 22:53:07] [INFO] [SNMP] get_value() called
[2025-10-05 22:53:07] [INFO] [SNMP]   Target: 192.168.0.11, OID: 1.3.6.1.4.1.19865.2.8.0, Community: public, Timeout: 3.0s
[2025-10-05 22:53:08] [INFO] [SNMP] cmd=snmpget -v1 -c public 192.168.0.11 1.3.6.1.4.1.19865.2.8.0
[2025-10-05 22:53:08] [INFO] [SNMP] rc=0
[2025-10-05 22:53:08] [INFO] [SNMP OUT]
SNMPv2-SMI::enterprises.19865.2.8.0 = INTEGER: 0

[2025-10-05 22:53:08] [INFO] [SNMP] snmpget returned: rc=0
[2025-10-05 22:53:08] [INFO] [SNMP] _parse_snmp_value() called, output length: 49 chars
[2025-10-05 22:53:08] [INFO] [SNMP] Parsed value: '0'
[2025-10-05 22:53:08] [INFO] [SNMP GET] 192.168.0.11 1.3.6.1.4.1.19865.2.8.0 -> '0' (v1/public)
[2025-10-05 22:53:08] [INFO] [SNMP] CH8 state: OFF
[2025-10-05 22:53:08] [INFO] [SNMP] All 8 channels verified: OFF
[2025-10-05 22:53:08] [PASS] TEARDOWN 2 completed successfully
[2025-10-05 22:53:08] ===== tc_eeprom_persistence: RESULT: PASS =====

Environment

Steps

Log

Substeps

Log

Log

Log

Substeps

Log

Log

Log

Log

Log

Log

Log

Log

Log

Log

Log

Log

Log

Log

Log

Log

Substeps

Log

Log

Log

Substeps

Log

Log

Log

Log

Log

Log

Log

Log

Substeps

Log

Substeps

Log

Log

Log

Substeps

Log

Log

Log

Log

Log

Log

Log

Substeps

Log

Log

Log

EEPROM Artifacts